Miele CVA 6805 Operating And Installation Instructions
Built-in coffee machine
Hide thumbs
Also See for CVA 6805:
- Operating and installation instructions (108 pages) ,
- Installation instructions manual (19 pages) ,
- Quick start manual (2 pages)
Table of Contents
Related Manuals for Miele CVA 6805
Summary of Contents for Miele CVA 6805
- Page 1 Operating and installation instructions Built-in coffee machine To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en – GB M.-Nr. 10 214 741...
-
Page 2: Packaging Material / Disposal Of Old Machine
Packaging material / Disposal of old machine Disposal of the packing Disposing of your old machine material Electrical and electronic machines often contain valuable materials. They also The packaging is designed to protect contain materials which, if handled or the machine from damage during disposed of incorrectly, could be transportation. -
Page 3: Table Of Contents
Contents Packaging material / Disposal of old machine .......... 2 Warning and Safety instructions................ 6 Guide to the machine .................. 17 Exterior view ......................17 Accessories ...................... 19 Operation...................... 20 Touch display ......................20 Operation....................... 21 Symbols in the display ..................24 Using for the first time .................. - Page 4 Activating and deactivating mains water connection..........55 Plate warmer ......................55 Spout adjustment ....................55 Factory default....................... 56 Miele@home, Remote control and SuperVision ............ 56 Demo mode (Showroom programme) ..............56 Cleaning and care .................... 57 Quick guide ......................57 Cleaning by hand or in the dishwasher ..............
- Page 5 Saving energy ...................... 93 Plumbed in water connection ................ 94 Electrical connection .................. 96 Installation...................... 97 Building-in and combination options ..............97 Ventilation ......................98 Building in the coffee machine ................99 Adjusting the hinges.................... 100 Miele@home....................... 101 Copyright and licences .................. 103...
-
Page 6: Warning And Safety Instructions
They contain important notes on installation, safety, use and maintenance. Miele cannot be held liable for damage caused by non-compliance with these instructions. Keep these instructions in a safe place and pass them on to any... - Page 7 Warning and Safety instructions Correct application This coffee machine is intended for use in domestic households and similar working and residential environments. Examples of a working or residential environment include – shops, offices and other working environments, – small businesses, showrooms etc., –...
- Page 8 Warning and Safety instructions Safety with children Caution! Danger of burning and scalding on the dispensing spouts. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensing spouts.
- Page 9 Warning and Safety instructions Technical safety Installation and repairs may only be carried out by a Miele authorised service technician. Installation, repairs and other work by unqualified persons can cause considerable danger to users. A damaged coffee machine could be dangerous. Before building in the machine, check it for any externally visible damage.
- Page 10 Ensure the coffee machine has cooled down completely before closing the furniture door. Repairs may only be carried out by a Miele authorised service technician. Repairs by unqualified persons can cause considerable danger to the user.
- Page 11 Only use genuine original Miele accessories with this machine. Using spare parts or accessories from other manufacturers will invalidate the guarantee, and Miele cannot accept liability.
- Page 12 Warning and Safety instructions Plumbed in water connection Do not connect the coffee machine to a hot water supply. The stopcock must be easily accessible after the coffee machine has been built in. The protective sleeve of the water inlet hose must not be damaged or become kinked.
- Page 13 Warning and Safety instructions Correct use Danger of burning and scalding on the dispensing spouts. The liquids and steam dispensed are very hot. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Do not touch hot components.
- Page 14 Sugar will damage the coffee machine. Only add ground coffee or the Miele cleaning tablets for degreasing the brew unit to the ground coffee chute. Do not use any caramelised ready ground coffee. The sugar in the coffee will stick to and block the brew unit of the coffee machine.
- Page 15 Descale the coffee machine regularly depending on the water hardness level in your area. Descale the machine more frequently in areas with very hard water. Miele cannot be held liable for damage arising from insufficient descaling, the use of incorrect descaling agent or the use of descaling agent which is not of the appropriate concentration.
- Page 16 Warning and Safety instructions For machines with stainless steel surfaces: Do not use sticky notes, transparent adhesive tape, masking tape or other types of adhesive on stainless steel surfaces. These damage the surface, causing it to lose its dirt repellent protective coating.
-
Page 17: Guide To The Machine
Guide to the machine Exterior view a On/Off sensor b Touch display c "Back" sensor d Handle e Hot water spout f Drip tray cover g Central spout with lighting and automatic height adjustment h Milk flask and lid... - Page 18 Guide to the machine Interior view i Ground coffee chute cover j Brew unit k Ground coffee chute l Slide control to select fineness of ground coffee m Coffee bean container n Water container with inlet device o Drip tray with grid p Waste container q Drip catcher r Central spout connector...
-
Page 19: Accessories
Accessories These products and other useful – Angled connector for milk accessories can be ordered via the pipework Miele webshop, from Miele (see back Replacement part cover for contact details) or from your Optional accessories Miele dealer. Miele accessories and cleaning and... -
Page 20: Operation
Operation Touch display The display can be scratched by pointed or sharp objects, e.g. pens. Only touch the touch display with your finger tips. Touching the display with your finger creates a tiny charge which releases an electrical impulse. This impulse is recognised by the touch display. The touch display does not react if you touch it with an object. -
Page 21: Operation
Operation Operation Each time you touch a possible option the relevant field lights up orange. Selecting or opening a menu Touch the field you want with your finger. Scrolling You can scroll to the right or the left. Some options allow you to scroll up and down too. - Page 22 Operation The numerical keypad will appear. Touch the numbers you want. When you enter a valid number, the field will light up green. Touch Entering letters Profile names or the names for your own drinks are entered using a keyboard. It is best to select short names.
- Page 23 Operation Help Helpful information is available when maintenance programmes are selected. Help will appear in the bottom row. To display information in text and pictures, Touch Help To return to the maintenance programme, Touch Close...
-
Page 24: Symbols In The Display
(This symbol can also be found on the water container: fill up to this mark). SuperVision display – only appears if the coffee machine has been signed on to the Miele@home appliance network and " SuperVision display – " has been selected (see... -
Page 25: Using For The First Time
– Display (Clock display) about this will appear in the display. Touch the On/Off sensor . Selecting the water supply (Mains The welcome message Miele - water) will appear in the display Willkommen The coffee machine is intended to be briefly. -
Page 26: Water Hardness
Using for the first time – : The water container must be Water hardness filled manually. A message to this The water hardness level indicates how effect will appear in the display. much calcium is dissolved in the water. Select the water supply option you The higher the calcium content, the want and touch ... - Page 27 Using for the first time Measuring the water hardness level You can determine the water hardness yourself using the enclosed test strip. Alternatively, your local water authority will be able to tell you the hardness of water in your area. ...
-
Page 28: Filling The Water Container
Filling the water container Change the water every day to prevent a build-up of bacteria. If the coffee machine is plumbed into the mains drinking water supply, the water container will fill automatically as soon as the machine is switched on. The inlet device in the lid ensures that the water is taken in slowly. -
Page 29: Filling The Coffee Bean Container
Filling the coffee bean container Fill the coffee bean container with Tip: You can use a nut or seed grinder roasted coffee or espresso beans if you to grind green coffee beans. These want to use freshly ground coffee beans types of grinder generally have a for each cup of espresso or coffee. -
Page 30: Switching On And Off
Switching on and off Switching on Switching the coffee machine When the coffee machine is switched on, it heats up and rinses the pipework. Touch the On/Off sensor . This not only cleans the pipework, but If coffee has been dispensed, the coffee also warms it before coffee is prepared. -
Page 31: Spout Adjustment
Spout adjustment Switching the spout The central spout cannot be manually adjustment on and off adjusted. Start in the Drinks menu. Before making the drink, the central spout moves to the optimum height for Touch or . Main menu the cups or glasses used. ... -
Page 32: Making Drinks
Making drinks Making a coffee The spouts present a danger of burning or scalding. The liquids and steam dispensed are very hot. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Do not touch hot components. -
Page 33: Cancelling Preparation
Making drinks Two portions of the desired drink will be Making coffee with ground dispensed from the central spout. coffee Cancelling preparation To make coffee using ready ground coffee, add a portion of ground coffee Touch Stop Cancel to the ground coffee chute. This gives you the option of making a Coffee pot: making several cup of decaffeinated coffee, for... - Page 34 Making drinks Open the machine. If no drink is selected within approx. 15 seconds, the ground coffee will also be directed into the waste container. Remove the cover to the ground coffee chute and open the lid. Add one level spoon of ready ground coffee to the chute.
-
Page 35: Drinks With Milk
Making drinks Notes on the milk flask Drinks with milk Milk is not cooled in the milk flask. Danger of burning and scalding Therefore, place the milk flask in the on the central spout. refrigerator if you are not going to use The liquids and steam dispensed are milk for a while. -
Page 36: Dispensing Hot Water
Making drinks Dispensing hot water Danger of burning and scalding on the hot water spout. Water coming out of the spout is very hot. Start in the Drinks menu. Please note that the water dispensed is not hot enough for making tea. ... -
Page 37: Making Drinks Using A Profile
Making drinks Making drinks using a profile After making drinks If you have already created a user If you have made a drink with milk, Start profile (see "Profiles"), you can select it rinse cycle will appear in the display after before dispensing a drink. -
Page 38: Coffee The Way You Like It
Coffee the way you like it To set the coffee machine up for the To avoid damaging the grinder, type of coffee you are using, you can please note the following: Only adjust the grinder one setting at – change the grinder setting, a time. -
Page 39: Altering The Drinks Parameters
Coffee the way you like it Altering the drinks parameters Amount of coffee You can set the amount of coffee, pre- The coffee machine can grind and brew brewing and the brewing temperature 6-14 g of coffee beans per cup. The for each drink individually. -
Page 40: Brewing Temperature
Coffee the way you like it Brewing temperature Pre-brewing the coffee The ideal brewing temperature will When the pre-brewing function is depend on switched on, the freshly ground coffee is first moistened with a little hot water. – the type of coffee being used, Then the remaining water is forced –... -
Page 41: Portion Size
Portion size The flavour of the coffee produced Start in the Drinks menu. depends not just on the type of coffee Place the desired cup under the used, but also on the amount of water central spout. used. Touch You can programme the amount of Process and then... -
Page 42: Resetting Drinks
Resetting drinks You can reset portion sizes and parameters for all drinks back to their factory default setting. Start in the Drinks menu. Touch Process and then Reset drinks Reset all drinks to default? will appear in the display. ... -
Page 43: Profiles
Profiles In addition to the Miele profile, you can Creating a profile enter individual profiles to cater for Touch Create profile different tastes and preferences. The editor will open in the display. In each profile you can adjust the settings for individual drinks (portion ... -
Page 44: Changing A Profile
Profiles Changing a profile You can programme the coffee machine so that it changes back to the Miele standard profile automatically after each drink is dispensed or so that it retains the most recently selected profile. Select and then... -
Page 45: Profiles: Creating And Processing Your Own Drinks
Profiles: creating and processing your own drinks You can create your own drinks for The newly created drink will appear in each profile and set the portion size and the profile. drinks parameters, e.g. amount of Changing a drink: changing the coffee or brewing temperature for each portion size(s), drinks drink individually. -
Page 46: Mymiele
MyMiele You can display drinks you make To delete entries frequently, drinks from profiles and Touch Process maintenance programmes in the MyMiele screen. Select Delete entry The MyMiele screen can be set to Select the entry you want and then appear as the start screen (see touch ... -
Page 47: Settings
Settings You can use the "Settings" menu to Changing and saving settings customise the coffee machine to suit Touch Main menu or . your requirements. Select Settings Opening the Settings menu Select the option you want to Start in the Drinks menu. -
Page 48: Possible Setting Options
Settings Possible setting options The factory default for each option has a * next to it. Option Available settings Select language deutsch , English and other languages Country Time Display – Night dimming Clock type – Analogue Digital Clock format –... - Page 49 Settings Option Available settings Start screen Main menu Drinks Profiles MyMiele Info Number of drinks – Total coffee drinks Espresso Coffee Long coffee Cappuccino Latte macchiato Caffè latte Milk froth milk Hot water No. of uses until Descale the appliance / Degrease the brew unit System lock ...
-
Page 50: Language
This option will only appear in the The coffee machine will use more coffee machine is signed on to the energy depending on the option you Miele@home appliance network (see choose for the display. Information separate Operating instructions). about this will appear in the display. -
Page 51: Timer
Settings Switch on at Timer There are two timers with the following The coffee machine will not switch on functions: at the required time if you have activated the system lock. The coffee machine The timer settings are deactivated. – switches on at a particular time, e.g. If the coffee machine has switched itself in the morning for breakfast ( Switch on... - Page 52 Settings Switch off after Activating and deactivating the timer If you have selected Night dimming Switch off after timer function is for the time display: only available in Timer 1. when Switch on at is activated for the timer, the symbol and the desired If none of the sensors has been touched or no drink has been made, the switching on time will appear in the...
-
Page 53: Eco Mode
Settings Eco mode Lighting Eco mode is an energy-saving mode. You have the following options: The steam system does not heat up – You can set the brightness when the until a coffee drink or steam for hot machine is switched on. milk / milk froth is requested. -
Page 54: Start Screen
Settings Start screen Locking the coffee machine (System lock ) You can choose which screen appears when the coffee machine is switched You can lock the coffee machine to prevent it being used without your knowledge, by children, for example. – Main menu Activating and deactivating the –... -
Page 55: Water Hardness
The special connection cable required Volume is available to order from Miele or your Miele dealer. You can set the volume of the buzzer and keypad tones using the bar chart. Once the warming drawer is connected,... -
Page 56: Factory Default
– MyMiele – Profiles and their drinks: see "Profiles" and "Profiles: creating and processing your own drinks" – (Standard) Miele Profile portion sizes and parameters: see "Resetting drinks" Miele@home, Remote control and SuperVision These options will only appear if the... -
Page 57: Cleaning And Care
Cleaning and care Clean the coffee machine regularly to avoid a build-up of bacteria. Quick guide Recommended frequency What do I have to clean / maintain? Every day the milk flask and lid (at the end of the day) the water container the waste container the drip tray and the drip tray cover... -
Page 58: Cleaning By Hand Or In The Dishwasher
Cleaning and care Cleaning by hand or in the Danger of burning and scalding dishwasher on hot components or by hot liquids. Always allow the coffee machine to The following must be cleaned by hand cool down before cleaning it. only: Caution: Water in the drip tray can be –... -
Page 59: Unsuitable Cleaning Agents
Cleaning and care Unsuitable cleaning agents All surfaces are susceptible to scratching. Scratches on glass can in some circumstances lead to breakage. Contact with unsuitable cleaning agents can alter or discolour the external surfaces. Ensure that any splashes of descaling solution are wiped up immediately. -
Page 60: Drip Tray
Cleaning and care Drip tray Danger of burning. If the rinsing process has just finished, wait a while before removing the drip tray as the water used for rinsing will run out of the coffee spouts. Clean the drip tray every day to prevent unpleasant odours and ... -
Page 61: Drip Tray Cover
Cleaning and care Drip tray cover Water container Remove the drip tray cover. Change the water every day to prevent a build-up of bacteria. The drip tray cover can be cleaned in the dishwasher, or by hand using hot Make sure that the valve, the water and a little washing-up liquid. -
Page 62: Waste Container
Cleaning and care Waste container Central spout After a certain period of time a reminder With the exception of the stainless steel to empty the waste container will cover, all parts of the central spout appear in the display. The waste should be cleaned in the dishwasher at container must be cleaned when this least once a week. - Page 63 Cleaning and care Press catch upwards slightly, Turn upper connecting piece and grasp the dispensing unit by the pull it upwards to remove it. Remove handle and pull this forwards and off lower connecting piece in the . same way.
- Page 64 Cleaning and care Reassemble the dispensing unit in the reverse order. Make sure that upper connecting piece clicks into Tip: Place the dispensing unit vertically position. Press dispensers firmly in the upper basket of the dishwasher. into position. Place the connecting pieces and the dispensers in the cutlery tray.
-
Page 65: Sensor Cover
Cleaning and care Sensor cover Maintenance of the milk valve The sensor cover for the cup protection The milk valve should be cleaned once cut-out is located under the central a week to ensure good quality milk froth spout. If the automatic spout and prevent sputtering. -
Page 66: Milk Flask And Lid
Cleaning and care Dismantling the milk flask lid and Milk flask and lid cleaning it with the cleaning brush Soiling can cause a fault in the Milk fat deposits can collect in the milk machine. flask lid. These will cause the milk to It is important to keep the neck and sputter when milk froth is being made. -
Page 67: Coffee Bean Container
Cleaning and care Coffee bean container Take the coffee bean container out of the machine and then push the lid back to remove it. Clean the coffee bean container and the lid by hand using hot water and a little washing-up liquid and then dry them both thoroughly. -
Page 68: Interior And Machine Front
Cleaning and care Interior and machine front Central spout connector First take out all removable parts and The part which connects the brew unit then clean the interior and the and the central spout is located on the machine front with a mild solution of inside of the machine front. -
Page 69: Brew Unit
Cleaning and care Brew unit After taking the brew unit out of the machine do not change the position Removing and cleaning the brew unit of the brew unit handle, as this by hand would cause the brew unit to be out of alignment and you will not be able Clean the brew unit by hand only to push it back into the coffee... -
Page 70: Maintenance Programmes
Cleaning and care Maintenance programmes The coffee machine has the following maintenance programmes: – Rinse the machine – Rinse the milk pipework – Clean the milk pipework – Degrease the brew unit – Descale the machine Press the button under the handle of Carry out the relevant maintenance the brew unit ... -
Page 71: Rinsing The Machine
Cleaning and care Rinsing the machine Rinsing the milk pipework After a coffee has been dispensed, the Milk residue can clog up the milk pipework is rinsed before the coffee pipework. If you have made a drink with machine switches off. This removes any milk, the coffee machine will rinse the residual coffee. -
Page 72: Cleaning The Milk Pipework
Miele coffee machines and prevents subsequent damage. Confirm the message with The milk pipework cleaning agent is available to order from Miele or via the internet at www.miele-shop.com. Add one sachet of the milk pipework cleaning agent to the water container. -
Page 73: Degreasing The Brew Unit
Miele cleaning tablets can be ordered the solution. via the Miele webshop, from Miele (see Follow the instructions for the mixing back cover for contact details) or from ratio carefully. It is important that you your Miele dealer. - Page 74 Cleaning and care Follow the instructions in the display. When Place a cleaning tablet in the ground appears coffee chute and close the chute in the display: Remove the coffee chute cover and open the lid of the coffee chute. ...
-
Page 75: Descaling The Machine
Descaling must be carried out. The These have been specially developed process takes approx. 20 minutes. for use with Miele coffee machines and The coffee machine prompts you when prevent subsequent damage. it needs to be descaled. No. of uses until... - Page 76 Descaling the machine Carrying out descaling Replace the water container in the coffee machine and close the front. Follow the further instructions given in the display. When Fill the water container with fresh tap water up to the descaling symbol appears in the display: ...
- Page 77 Descaling the machine Descaling when not prompted by a message Touch or . Main menu Select . Maintenance The descaling process cannot be cancelled once it has started. The process has to be completed through to the end. Select Descale The descaling process will now start.
-
Page 78: Problem Solving Guide
Follow the instructions which appear in the display to remedy the problem. If after this, the fault message appears in the display again, contact Miele Service. Problem Cause and remedy F1, F2, F3, F4, There is an internal fault. - Page 79 Problem solving guide Problem Cause and remedy F73 or The brew unit cannot be positioned correctly, or it is dirty and the ground coffee cannot be processed. Check the brew unit Check whether you can remove the brew unit (see "Cleaning and care - Brew unit").
- Page 80 Problem solving guide Problem Cause and remedy F234 Cup protection cut-out has been activated three times since switching on the coffee machine. The cups or glasses being used are not recognised by the automatic spout adjustment. Use cups or glasses which can be recognised by the automatic spout adjustment.
-
Page 81: Unusual Performance Of The Coffee Machine
Switch the coffee machine off at the wall socket and unplug it. Contact a qualified electrician or Miele. The lighting remains off The lighting has been switched off. after the coffee ... - Page 82 Problem solving guide Problem Cause and remedy The coffee machine The system lock has been activated. does not switch itself You need to deactivate the system lock (see on, although the Switch "Settings - System lock"). on at setting has been A day of the week has not been selected.
- Page 83 Problem solving guide Problem Cause and remedy Empty the drip tray The drip tray is not positioned correctly in the appears in the display, machine. even though the drip Push the drip tray in as far as it will go. tray has been emptied.
- Page 84 Problem solving guide Problem Cause and remedy The machine front is The cap on the central spout connector has either not difficult to open and been lubricated or is not lubricated sufficiently. close. Check the silicone cap for damage. If necessary, replace it with the extra cap supplied.
- Page 85 Problem solving guide Problem Cause and remedy Drink preparation has There is a problem with the mains water inlet. been cancelled. Check whether the inlet hose is kinked or the stopcock is not turned on completely. The water container became empty while a drink was being made, however, Mains water - On is selected...
- Page 86 Use another cup or glass and make a drink. If the cup protection cut-out is triggered again or the central spout moves to the rim of the cup or glass again, contact Miele. The cup protection cut- If the cleaning container is very close to or touching out is not working.
-
Page 87: Unsatisfactory Results
Fill the container with fresh beans. There may be stones in amongst the coffee beans. Switch the coffee machine off immediately. Call Miele. The coffee flows too The coffee is too coarsely ground. quickly into the cup. - Page 88 Problem solving guide Problem Cause and remedy The coffee trickles too The coffee is too finely ground. slowly into the cup. Set the grinder to a coarser setting (see "Grinder setting"). The crema on the The grinder setting is not correct. coffee or espresso is ...
-
Page 89: Problems When Heating Up Or Frothing Milk
Problem solving guide Problems when heating up or frothing milk Problem Cause and remedy The milk sputters when The milk temperature is too high. Good milk froth can it is dispensed. Hissing only be achieved when cold milk (< 10 °C) is used. noises can be heard ... -
Page 90: Replacing The Angled Connector
Problem solving guide Replacing the angled connector If instead of being frothed the milk is only being heated up, check the following first: – Is the milk in the milk flask cold (< 10 ° C)? – Have the central spout and the milk flask lid been cleaned carefully? ... - Page 91 Problem solving guide Push the tubes onto the angled connector and fit it in the coffee machine. Make sure that the cross- piece on the angled connector is facing downwards. Re-insert the air intake tube into opening . Replace the maintenance panel and close the front.
-
Page 92: After Sales / Warranty
2 years from the – Miele. date of purchase. However, you must activate your cover by calling 0330 160 Contact details for Miele are given at 6640 or registering online at the end of this booklet. N.B. A call-out www.miele.co.uk. -
Page 93: Saving Energy
Saving energy If the settings of the following functions are altered from the factory default, energy consumption will increase: – Eco mode – Lighting – Time of day display – Timer... -
Page 94: Plumbed In Water Connection
Plumbed in water connection The machine is only suitable for Notes on connecting to the connection to a cold water supply mains water supply which Connection to the mains water – is connected directly to the fresh supply should only be carried out by water supply to guarantee circulation a qualified and competent person. - Page 95 Plumbed in water connection Connection to the water inlet A faulty stainless steel hose must only be replaced by a genuine Miele Before making plumbing replacement hose (available from connections, ensure that the Miele or at www.miele-shop.com). machine is disconnected from the Make sure that the water hose is mains electricity supply.
-
Page 96: Electrical Connection
Electrical connection All electrical work should be carried out The coffee machine must not be used by a suitably qualified and competent with so-called energy saving devices person only, in strict accordance with either. These reduce the amount of current national and local safety energy supplied to the machine causing regulations (BS 7671 in the UK). -
Page 97: Installation
(except when it is combined with a suitable Miele built-in plate or food warming drawer). Some Miele warming drawers can be connected directly to a socket at the rear of the coffee machine using a special connection cable (available as an optional accessory) so that the warming drawer can be switched on and off at the same time as the coffee machine. -
Page 98: Ventilation
Installation – A ventilation gap of at least 40 mm Ventilation depth must be allowed for behind the Condensate can damage the coffee machine for air to circulate. machine or the housing unit. – The ventilation cross-sections in the The ventilation gaps given must be plinth, housing unit and below the observed. -
Page 99: Building In The Coffee Machine
If the housing unit niche is not fitted with a sealing strip you should fit a Push the coffee machine all the way Miele sealing strip to the machine into the niche until you feel a before installing it. This is fitted from resistance. -
Page 100: Adjusting The Hinges
Installation Four M5 screws are supplied for Adjusting the hinges aligning and securing the machine in its If the machine front becomes difficult to niche. open or close after installation, you can adjust the hinges to realign it (TX 20): Open the front of the machine and loosely fit the screws at either side. -
Page 101: Miele@Home
Miele@home a Miele@home communication enabled appliance b Miele@home communication stick XKS3000Z or communication module XKM3000Z c Miele@home communication enabled Master appliance with SuperVision functionality d Miele@home Gateway XGW3000 e WiFi router f Connection to a Home automation system g Smartphone, Tablet PC, Laptop... - Page 102 Miele@home Please note that the Miele@home and – In Germany, network enabled SuperVision system is currently only appliances can be integrated into the available in selected countries. QIVICON Smart Home Platform instead of the Miele@home Gateway This appliance / is network enabled (www.qivicon.de).
-
Page 103: Copyright And Licences
You will need to enter the specific product name. Miele will provide the source code for all components of software licensed under the GNU General Public Licence and comparable Open Source licences. For source code requests, please email info@miele.com. - Page 107 Tel: +65 6735 1191 Fax. +971 4 3418 852 Fax: 011-46 900 001 Fax: +65 6735 1161 800-MIELE (64353) E-mail: customercare@miele.in E-Mail: info@miele.com.sg E-Mail: info@miele.ae Internet: www.miele.in Internet: www.miele.sg Website: www.miele.ae Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany...
- Page 108 CVA 6805 en – GB M.-Nr. 10 214 741 / 01...