Unsatisfactory results
Problem
The coffee is not hot
enough.
The heating-up time is
getting longer, the
amount of water being
dispensed is incorrect
and the coffee machine
is not performing
properly. Coffee flows
very slowly out of the
central spout.
Coffee is not being
dispensed from both
spouts evenly. Milk may
be sputtering when
being heated up.
The coffee grinder
makes a louder noise
than usual.
The coffee flows too
quickly into the cup.
Cause and remedy
The cup has not been pre-heated.
The smaller the cup and the thicker its sides, the
more important it is to pre-heat it.
Pre-heat the cup, for example, with hot water.
The brewing temperature has been set too low.
Set a higher brewing temperature.
The filters in the brew unit are blocked.
Remove the brew unit and clean by hand
Degrease the brew unit.
The coffee machine needs descaling.
Descale the coffee machine.
Coffee deposits in the central spout are obstructing
dispensing.
Dismantle the central spout and clean the
components – with the exception of the stainless
steel cover – in the dishwasher (see "Cleaning and
care – Central spout").
The central spout should be cleaned once a
week.
The coffee bean container has become empty during
the grinding process.
Fill the container with fresh beans.
There may be stones in amongst the coffee beans.
Switch the coffee machine off immediately. Call
Miele.
The coffee is too coarsely ground.
Set the grinder to a finer setting (see "Grinder
setting").
Problem solving guide
87