hit counter code

Switching On And Off; Before Using For The First Time; Operating The Appliance; Switching On - Miele KFNS 37692 iDE Operating And Installation Instructions

Table of Contents

Advertisement

Switching on and off

Before using for the first time

Removing packaging material
 Remove all packaging material from
the inside of the appliance.
Protective foil
The stainless steel trims and stainless
steel panels in the appliance have a
layer of protective foil to prevent
scratching during transportation.
 Remove this protective foil once the
appliance has been installed.
Cleaning the appliance
Please refer to the relevant
instructions in "Cleaning and care".
Important: Each time the Miele Care
product for stainless steel is used, it
applies a protective film that is stain
and water resistant.
 Treat stainless steel surfaces with the
Miele Care product for stainless steel
immediately after removing the
protective foil (see "Optional
accessories").
 Clean the inside of the appliance and
the accessories.
 Clean the ice cube maker: After
selecting the "Rinse ice cube maker"
setting, the ice cube maker and the
water pipes are rinsed automatically
with water.
22

Operating the appliance

A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Each touch of a sensor is confirmed
with a keypad tone. The keypad tone
can be switched off if you wish (see
"Further settings - Audible tones").

Switching on

When the appliance is connected to the
electricity supply, the mains connection
symbol   will appear in the display
after a short while.
 Touch the On/Off sensor.
The mains connection symbol  goes
out and the appliance starts to cool.
The sensors for cooling zones that can
be selected appear in the control panel:
The refrigerator section sensor is
highlighted yellow and the current
temperature in this section appears in
the display.

Advertisement

Table of Contents
loading

Table of Contents