hit counter code

Cleaning The Ice Cube Tray - Miele KFNS 37692 iDE Operating And Installation Instructions

Table of Contents

Advertisement

Cleaning and care
 Carefully remove the ice cube drawer
which is now filled with water. Empty
and clean it.
The ice cube tray is not removable
and can only be cleaned when in
place.
 Dry the ice cube tray  with a soft
cloth.
As soon as the ice cube maker is
switched back on, the ice cube tray
rotates back into its original position.

Cleaning the ice cube tray

Clean the ice cube tray,
– before switching off the ice cube
maker for a long time.
– regularly, to remove ice and water
residues.
If you have already selected the
setting "Rinse the ice cube
maker" (see "Rinsing the ice cube
maker"), the ice cube tray will already
be in the cleaning position.
The ice cube tray  is not removable
and can only be cleaned when in place.
To do this, place the ice cube tray in the
cleaning position.
60
Setting the cleaning position
The setting can only be selected if the
ice cube maker is switched on.
 Empty the ice cube drawer.
 Touch the settings sensor.
All selectable symbols appear in the
display and the  flashes.
 Touch the sensors for setting the
temperature ( and ) repeatedly
until the ice cube maker symbol 
flashes in the display.
 Touch the OK sensor to confirm your
selection.
 By touching the  and  sensors,
you can now select the setting you
want:
0: the ice cube maker is switched off
1: the ice cube maker is switched on
2: set the water volume
3: select the ice cube tray cleaning
position
4: rinse the ice cube maker
 Touch the OK sensor to confirm your
selection.
The selected setting is saved and you
will hear the ice cube tray moving into a
slanted position.
 Wait until the ice cube tray has
completed this rotation before
continuing.
The ice cube maker will then switch off.
The symbol for the ice cube maker 
will disappear from the display.

Advertisement

Table of Contents
loading

Table of Contents