Switching on and off
Before using for the first time
Removing packaging material
Remove all packaging material from
the inside of the appliance.
Protective foil
The stainless steel trims and stainless
steel panels in the appliance have a
layer of protective foil to prevent
scratching during transportation.
Remove this protective foil once the
appliance has been installed.
Cleaning the appliance
Please refer to the relevant
instructions in "Cleaning and care".
Important: Each time the Miele Care
product for stainless steel is used, it
applies a protective film that is stain
and water resistant.
Treat stainless steel surfaces with the
Miele Care product for stainless steel
immediately after removing the
protective foil (see "Optional
accessories").
Clean the inside of the appliance and
the accessories.
Clean the ice cube maker: After
selecting the "Rinse ice cube maker"
setting, the ice cube maker and the
water pipes are rinsed automatically
with water.
22
Operating the appliance
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Each touch of a sensor is confirmed
with a keypad tone. The keypad tone
can be switched off if you wish (see
"Further settings - Audible tones").
Switching on
When the appliance is connected to the
electricity supply, the mains connection
symbol will appear in the display
after a short while.
Touch the On/Off sensor.
The mains connection symbol goes
out and the appliance starts to cool.
The sensors for cooling zones that can
be selected appear in the control panel:
The refrigerator section sensor is
highlighted yellow and the current
temperature in this section appears in
the display.