Page 1
Operating instructions Heat pump dryer To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-SA M.-Nr. 11 459 581...
Display......................... 21 Examples on how to operate the appliance ............21 Before using for the first time ................22 Downtime after installation.................. 22 Miele@home ......................22 Energy saving tips ..................... 25 Energy saving tips ....................25 EcoFeedback....................... 26 1. Notes on correct laundry care ..............27 Points to note regarding washed laundry............
Page 3
Contents Extras........................42 Gentle tumble ...................... 42 Freshen up......................42 Anti-crease ......................42 Buzzer........................42 Drying programme overview - Extras ..............43 Changing the programme sequence .............. 44 Adding or removing laundry ................44 Condensed water container ................45 Emptying the condensed water container ............45 Fragrance flacon....................
Page 4
Contents Optional accessories................... 65 Guarantee......................65 Installation......................66 Front view ......................66 Rear view......................67 Transporting the tumble dryer ................67 Transporting the tumble dryer to its installation site ........67 Installation ......................68 Levelling the dryer ..................68 Downtime after installation................68 Ventilation .......................
Please dispose of it at your local community waste collection / recycling centre or contact your Miele dealer for advice. Ensure that it presents no danger to children while being stored for disposal.
If using dry cleaning kits, do so at your own risk, and follow the instructions provided on the packaging. Any other applications may be dangerous. Miele cannot be held liable for damage resulting from incorrect or improper use or operation.
Page 8
Warning and Safety instructions This tumble dryer can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, if they are supervised whilst using it or have been shown how to use it in a safe way and understand and recognise the consequences of incorrect operation.
Page 9
It is essential that this standard safety requirement is met. If in any doubt, please have the household wiring system tested by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).
Page 10
Miele replacement parts are used. Unauthorised repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be undertaken by a Miele approved technician, otherwise any subsequent damage will not be covered by the warranty.
Page 11
Warning and Safety instructions Heat pump technology and refrigerant: this tumble dryer uses a gaseous refrigerant which is condensed by the compressor. The refrigerant, which is brought to a higher temperature level and liquefied by condensing, is led in a closed circuit through the heat exchanger unit where heat exchange with the circulating drying air takes place.
Page 12
This special lamp must only be used for the purpose it is intended for. It is not suitable for room lighting. Replacement lamps may only be fitted by a Miele authorised person or your Miele dealer.
Page 13
Warning and Safety instructions Correct use Do not install the tumble dryer in a room where there is a risk of frost occurring. At temperatures around freezing point the tumble dryer may not be able to operate properly. There is a risk of damage if the condensed water is allowed to freeze in the pump and hoses.
Page 14
Warning and Safety instructions To prevent the risk of fire, the following textiles must not be dried in this tumble dryer: - Items which have not been washed. - Items, such as workwear, which have not been thoroughly cleaned and which are still soiled with grease, oil or other deposits (such as cosmetics, lotions etc).
Page 15
Warning and Safety instructions To prevent the risk of fire, the following textiles must not be dried in this tumble dryer: - Items which have been cleaned using chemicals (e.g. professional dry-cleaning agents). - Items which contain a large proportion of rubber, foam rubber or rubber-like materials.
Page 16
Warning and Safety instructions The tumble dryer must not be used without fluff filters or - with damaged fluff filters, or - with a damaged plinth filter. This would cause an excessive build-up of fluff which in turn would cause a fault.
Page 17
Warning and Safety instructions Using a fragrance flacon (optional accessory) Only use genuine Miele original fragrance flacons. The fragrance flacon must be stored in its packaging so please make sure you retain this. Caution. The fragrance can leak out of the flacon. Make sure that...
Page 18
(available to order) to match your tumble dryer and washing machine is required. If you order a plinth for this tumble dryer (available from your Miele dealer as an optional accessory - depending on country), make sure it is the correct one.
Operating the tumble dryer Control panel a Control field d OK sensor The control field consists of a The OK sensor is used for display and various sensor controls. confirming selected values. The individual sensors are explained e Perfect Dry indicator in the following sections.
Operating the tumble dryer f Optical interface j Start/Add laundry sensor control This is used by your Miele dealer as Touching the Start/Add a transmission point. laundry sensor control starts a programme. The current programme g Sensors for extra options can be interrupted to add laundry.
Operating the tumble dryer Identifying the selected option Display The basic display shows the following for a drying level programme: An activated option in a list will have a Normal 0:55 tick next to it. ...
After setting up the tumble dryer wait - a WiFi network for at least one hour before switching it on. - the Miele@mobile app - a Miele user account. The user Protective foil and stickers account can be created via the removal Miele@mobile app.
Page 23
Miele@home availability Further programmes/ position in the The ability to use the Miele@mobile app Settings sub-menu. depends on the availability of the ...
Page 24
Before using for the first time Select the required connection type Continue with setting up from the display. Confirm with the OK sensor. Connect via WPS See “1. Notes on correct laundry Connect via App care”. You can then select a programme Before installing the tumble dryer in and load the tumble dryer as its final location, ensure the signal...
Energy saving tips - If possible, make use of time- Energy saving tips variable, low-cost electricity tariffs. This dryer with heat-pump technology Ask your energy supplier for is designed for energy-saving drying information. Your tumble dryer's cycles. However, you can save a little delay start function will be useful as more energy with the following you can select when during the next...
Energy saving tips 2. Viewing the actual consumption EcoFeedback The actual energy consumption can be You can view information about the viewed during the programme or at the energy consumption of your tumble end of the programme. dryer with the sensor. ...
1. Notes on correct laundry care Points to note regarding Risk of fire due to incorrect use washed laundry and operation. The laundry can burn and destroy - When washing very heavily soiled the dryer and the surroundings. items ensure that you use sufficient See “Warning and Safety”...
1. Notes on correct laundry care - Always observe the maximum Care label symbols recommended load for each Drying programme. This will mean that the energy consumption for the amount Normal/higher temperature of laundry is at its most economical. ...
2. Selecting a programme Switching on the tumble dryer Selecting a programme The dryer is switched on by selecting a There are three possible ways to select programme, and switched off by turning a programme: the programme selector to the 1.
Page 30
2. Selecting programmes via the 3. Selecting programmes via the “Further programmes/” setting and MobileStart programme selector the display position and the Miele@mobile app Tip: In order to use MobileStart , the tumble dryer must be logged on to the WiFi network and must Remote control be switched on.
3. Loading the tumble dryer 2 positions for inserting fragrance Loading the laundry flacons Preventing textile damage. The “Fragrance flacon” chapter Before loading, read chapter “1. describes how to use the fragrance Notes on correct laundry care”. flacon. If you are not using a fragrance flacon: push the tab down completely (see arrow) so that the socket is closed.
4. Selecting programme settings Other programmes and timed drying Programme settings programmes Selecting the drying level for a drying Warm Air, Cool Air, Basket programme level programme You can change the duration in 10 Cottons, Minimum iron, Delicates, Pre- minute increments. ironing, Shirts, Express, Denim, Outerwear, Sportswear, Bed linen, Cool air: 20 min.–1:00 h.
4. Selecting programme settings Setting the delay start time Selecting an extra option Touch the sensor. Freshen up Gentle tumble The following will appear in the display: Anti-crease Buzzer Start in Touch a sensor control to select the desired extra option.
Page 34
4. Selecting programme settings The selected delay start time has been Setting the timeframe cancelled. If you have activated the SmartGrid function in Settings, SmartStart in After the programme has started, the instead of will appear in the Start in selected delay start time can only be display when you touch the ...
5. Starting a programme The drying level reached for the Starting the programme selected drying level programme will Touch the flashing Start/Add laundry light up in the display. sensor control. You can view the selected drying level or time again: The Start/Add laundry sensor control will light up and Drying appears in the ...
6. End of programme - unload the drum Turn the programme selector to the End of programme position. The programme is finished when Finish/ Remove the fluff from the 2 fluff filters Anti-crease Finished appears in the in the door opening: see “Cleaning display.
Programme chart All weights marked with * are based on the weight of dry laundry. Programmes on the control panel Cottons max. 9 kg* Use for Cotton items such as those described under Cottons Normal with normal residual moisture. Note - Items are dried to a Normal level only in this programme. - The Cottons ...
Normal +, Normal, Slightly dry, Hand iron , Hand iron Use for All shirts and blouses. MobileStart The Miele@mobile app is used for selecting programmes and operating the appliance. Denim max. 3 kg* Normal +, Normal, Slightly damp, Hand iron , Hand iron ...
Programme chart Proofing max. 2.5 kg* Use for Microfibre fabrics, skiwear, outdoor wear, fine, close-weave cotton garments (poplin), and table linen which are suitable for drying in a tumble dryer. Note - Items are dried to a Normal level only in this programme. - This programme includes a proofing agent fixing phase.
Programme chart Outerwear max. 2.5 kg* Normal, Hand iron Use for Outerwear which is suitable for tumble drying. Express max. 4 kg* Extra dry, Normal +, Normal, Slightly dry, Hand iron , Hand iron , Machine iron Use for Garments that can be dried in the Cottons programme. Note The programme duration is shorter.
Programme chart Basket programme max. load for basket 3.5 kg Note - This programme may only be used with the Miele tumble dryer basket TRK 555 (optional accessory) fitted. - You must follow the operating instructions for the tumble dryer basket.
Extras Anti-crease The drying programmes can be augmented with various extra options. After the programme has finished, the However, Freshen up and Gentle drum will continue to rotate in a certain tumble cannot be combined. rhythm. This “Anti-crease rhythm” helps to prevent creasing, if the laundry is not Freshen up Gentle tumble...
Changing the programme sequence Changing a programme once it Adding or removing laundry has started You have forgotten something but the programme is already running. It is no longer possible to change the selected programme. This is to prevent Touch the Start/Add laundry sensor the operation of the machine being control.
Condensed water container To prevent water from running out, Emptying the condensed water keep it in a horizontal position when container carrying it. Hold the condensed water The condensed water is collected in container by the front panel and at the condensed water container.
Fragrance flacon FragranceDos – 2 positions for Removing the protective seal inserting fragrance flacons from the fragrance flacon Fragrance flacons (optional Only hold the fragrance flacon as accessories) can be used to give your illustrated. Do not hold it at an angle laundry a pleasant scent.
Fragrance flacon Inserting the fragrance flacon Open the door of the tumble dryer. The fragrance flacon is inserted in the upper fluff filter. They can be fitted on the left and the right hand side next the opener. Insert the fragrance flacon into the socket as far as it will go.
Fragrance flacon The fragrance will also be noticeable in the room air during the process. The Cool Air programme will not generally apply fragrance. Closing the fragrance flacon After drying, the fragrance flacon should be closed to prevent the fragrance from escaping needlessly.
- Always store in a cool, dry place packaging. away from direct sunlight. Fragrance flacons are available to - When purchasing new fragrance order from Miele or online at flacons, only remove the protective www.miele-shop.com. seal just before use.
Cleaning and care Removing visible fluff Fluff filters Tip: You can also use a vacuum cleaner This tumble dryer has 2 fluff filters in so that you can remove the fluff without the door opening: the upper and lower touching it. fluff filters trap fluff produced during ...
Cleaning and care Remove the fluff from the filter Turn the yellow dial on the lower fluff surface of all the fluff filters and the filter in the direction of the arrow (until perforated laundry deflector. it reaches the stop position). ...
Cleaning and care Cleaning the fluff filters with water Wipe the smooth plastic surfaces of the fluff filters with a damp cloth to clean them. Flush the filters through under warm running water. Shake the fluff filters thoroughly and then dry them carefully.
Cleaning and care Cleaning the plinth filter Clean the plinth filter whenever Clean the plinth filter. See lights up or when the programme duration is longer than usual. To delete the message: Confirm with Removing the plinth filter ...
Cleaning and care Cleaning the plinth filter Fit the plinth filter back on the handle. Make sure it is the correct way round. Pull the handle out of the plinth filter. Clean the plinth filter thoroughly under running water. ...
Cleaning and care Cleaning the plinth filter access panel Cleaning the dryer Disconnect the tumble dryer from the electrical supply. Damage due to the use of unsuitable care products. Unsuitable care products could damage plastic surfaces and other parts. Do not use any solvents, abrasive cleaners, glass cleaners, or all- purpose cleaners.
Problem solving guide Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed. The following guide may help you to find the reason for a malfunction or a fault, and to correct it.
Page 57
Problem solving guide Message Cause and remedy The system has been clogged by fluff or detergent Clean the plinth filter. residue. See lights up To switch off the message: confirm after a programme has Clean all fluff filters and the plinth filter. been cancelled.
Page 58
Switch the dryer off and then on again. lights up after a Start a programme. programme has If the programme terminates again with the same been cancelled. error message, then there is a fault. Contact your Miele dealer.
Problem solving guide Unsatisfactory drying results Issue Cause and remedy The laundry is not The load consisted of different types of fabric. sufficiently dry. Finish drying using the Warm air programme. Select a more suitable programme next time. Tip: You can alter the residual moisture level for some programmes.
Problem solving guide The drying cycle duration is very long Issue Cause and remedy The drying process The room where the tumble dryer is located is too goes on too long or warm. even switches off.* Ventilate the room thoroughly. Detergent residues, hair and fine fluff can clog the filters.
Problem solving guide General problems with the tumble dryer Issue Cause and remedy You can hear operating This is not a fault. noises (buzzing/hum- The compressor (heat pump) is operating. ming). No action required. These noises are quite normal and can be heard when the compressor is operating.
Problem solving guide Deformations Replacing the plinth filter The heat exchanger can clog up. Replace the plinth filter immediately if you see the following signs of wear before or after cleaning (optional accessory). Poor fit Deformations indicate that the filter has become blocked and worn by continuous use.
Page 63
Problem solving guide Cracks, tears, indentations White residues or residues of other colours These residues arise from laundry fibres and traces of detergent components. They can be found on the front and side edges of the plinth filter. In extreme cases, they can form stubborn crust.
Problem solving guide Reactivating the plinth filter Checking the heat exchanger You can reactivate one or more soiled Risk of injury from sharp cooling plinth filters in a washing machine. You fins. will then be able to use the plinth filter You could cut yourself.
Optional accessories In the event of any faults which you Optional accessories for this tumble cannot remedy yourself, please contact dryer are available from Miele or from your Miele dealer. your Miele dealer. You also can order these and many...
*INSTALLATION* Installation Front view a Mains connection cable e Heat exchanger access panel – do not open during drying b Control panel f Four height adjustable screw feet c Condensed water container g Cool air intake grille – empty after every drying cycle –...
*INSTALLATION* Installation Rear view If the tumble dryer is being transported on its side, it must be tipped onto its left or right side. a Protruding lid for holding when If the tumble dryer is being moving the tumble dryer (see transported upright and you are using arrows) a hand truck, you must transport it...
*INSTALLATION* Installation Downtime after installation Installation Damage to the tumble dryer by Levelling the dryer switching it on too soon. Ensure that no closeable door, This can damage the heat pump. sliding door, or an oppositely hinged After setting up the tumble dryer wait door is installed that would hinder for at least one hour before switching the door of the dryer being opened in...
Optional accessories – Washer-dryer stack The tumble dryer can be combined with a Miele washing machine in a washer- dryer stack. The appropriate Miele washer-dryer stacking kit is required. – Plinth The tumble dryer can be fitted on a...
*INSTALLATION* Installation Installation conditions requiring a External condensed water non-return valve outlet Danger of condensed water Note back-flow. When drying is in progress, Water could flow back into the condensed water is pumped into the tumble dryer or be drawn into it. condensed water container through Back-flow water could damage the the drain hose which is located at the...
*INSTALLATION* Installation Arranging the drain hose Examples Drainage into a sink or floor gully Damage to the drain hose through incorrect handling. Use the hose holder to secure the drain hose. The drain hose can suffer damage and leak. Do not pull on the drain hose and do not stretch it or allow it to become kinked.
Page 72
*INSTALLATION* Installation Fit adapter 1 to the sink drain outlet Direct connection to a sink drain outlet using nut 2. Use the hose holder, the adapter, the The nut is usually fitted with a washer hose clips and the non-return valve which must be removed.
*INSTALLATION* Installation Hold the door securely and pull it Changing the door hinging forwards: to remove the door you will You can change the door hinging on need to pull the base plate of the this tumble dryer yourself. hinge with its 2 pins out of the dryer.
Page 74
*INSTALLATION* Installation Turn the door lock through 180°. Use a T20 Torx screwdriver to remove screw on the lock catch. Press the door lock into openings on the opposite side of the door Pull off the lock catch together with opening.
Page 75
*INSTALLATION* Installation 4. Dismantle the door hinge from the door The door hinge cover must be unclipped from position and then removed. Insert the lock catch into the new cover supplied with the dryer. Place this new cover to one side for now.
Page 76
*INSTALLATION* Installation 5. Change over the door hinge on the Tip: In some circumstances, the rods door can be difficult to dislodge. Moving the screwdriver with a levering action while The door hinge is secured to the door pulling at the same time may help to with 2 angled rods.
Page 77
*INSTALLATION* Installation You now need the new door hinge cover supplied with the tumble dryer. Fit new door hinge cover and clip it into position. 6. Change the lock catch on the door You now need the new lock catch cover supplied with the dryer which you have already fitted with the lock catch.
*INSTALLATION* Installation Refitting Now that you have changed the door hinging the door will open from 7. Refit the door the opposite side. Press the rubber seal back into the grove on the door. Push the orange marker round to the other side so that you will see at ...
If the connection cable is damaged, it must only be replaced with a specific connection cable of the same type (available from your Miele dealer). For safety reasons, such replacement may only be carried out by a qualified technician or your Miele dealer.
Technical data Height 850 mm Width 596 mm Depth 643 mm Depth with door open 1077 mm Suitable for pushing under a worktop Suitable for stacking Weight approx. 62 kg Drum volume 120 litres Load size 9.0 kg (weight of dry laundry) Capacity of condensed water container 4.8 l Hose length 1.49 m Maximum delivery head...
Page 81
Technical data Miele hereby declares that this heat-pump tumble dryer complies with Directive 2014/53/EU.
Settings Selecting settings Accessing the settings menu Touch the or sensor until the You can alter the tumble dryer's setting you want appears in the electronics to suit changing display. requirements with the settings. The settings can be altered at any - The ...
Settings Language Cooling down temp. The display can be set to appear in The laundry will be cooled down one of several different languages. automatically before the end of the programme. The automatic cooling- The flag after the word Language down phase which takes place before (Sprache in German) acts as a guide in the end of a programme can be set at...
Settings Keypad tone Airways indicator Each touch of a sensor is confirmed Fluff should be removed after drying. with an audible tone. In addition, this indicator will remind you to clean the filters when a certain Selection amount of fluff has collected in them: ...
Settings Conductivity Consumption This setting is only relevant for regions You can display the total with very soft water. consumption. Selection Very soft water can result in unsatisfactory drying results. Previous programme You should only select this setting if Displays energy consumption in the the water used for washing the last programme run laundry is extremely soft with a...
Make a note of your new code. If Buttons inactive you forget the code, the dryer will need to be unlocked by your Miele Controls the brightness of the sensor dealer. controls that can be activated. - (dark) - ...
Settings Disp. switch-off stat. Memory To save energy, the display and The dryer saves the settings that were sensor controls will go out after selected last for a drying programme 10 minutes. The Start/Add laundry (drying stage and/or extra option, or button flashes slowly.
WiFi network. A new connection has to be established in order to use Miele@home again. Please refer to “Before using for the first time” for instructions on how to set up the connection.
Miele@home setting is set up and up and activated. activated. Once the Miele@mobile app has been This function can be used for starting installed on your mobile device, you your tumble dryer automatically at a can check the status of your tumble...
If you select “Start later”, the you can continue to use your tumble prompt to run the RemoteUpdate will dryer in the usual way. However, Miele be displayed again the next time you recommends installing RemoteUpdates. switch on your tumble dryer.