hit counter code

Installing Version 3.0.5 - HP Open View Installation And Maintenance Manual

Continuous access storage appliance
Table of Contents

Advertisement

Implementing Path Failover

Installing version 3.0.5

To install PowerPath version 3.0.5 on node 0:
1. Ensure that the hp OV CASA Console window is open in administrative mode.
2. Press Alt+C to open a command prompt window.
3. To execute the 3.0.5 patch, enter:
4. Click Next.
5. Enter the customer's name and organization and click Next.
6. Click Next to install the software on the default directory listed. HP recommends that you
7. Click Install.
8. When the EMC PowerPath 3.0.0. – Install Shield Wizard Completed window opens,
9. When prompted to reboot the host, click Yes.
10. Ensure that the hp OV CASA Console window is open in administrative mode.
11. Click service viewer.
12. Select the RPIC DPF service, set it to Automatic, and click Apply.
13. Click Start.
14. Repeat steps 12 and 13 for the SMS service.
15. Close the Services window.
16. If this was an online installation, verify that the hosts connected to the EMC storage arrays
17. Switch the console display to node 1 and complete the following steps:
18. If you have not attached the EMC storage arrays to the appliance, go to
19. Connect the EMC storage arrays to the appliance.
20. If you have not already initialized sanosadmin, then initialize it on both appliance
21. From the console window of either appliance node, click sanos admin > launch.
22. Log in to sanosadmin.
78
c:\EMCPP.NT4.3.0.5.Patchb086\setup.exe
The EMC PowerPath 3.0.5. – Install Shield Wizard Welcome window opens.
use the default directory.
The Ready to Begin Installation dialog box opens.
click Finish.
The appliance node is rebooted.
The Services window opens.
can detect both paths. Otherwise, go to
Download the patch as instructed in
Complete
step 1
through
Complete
step 1
through
arrays are connected, go to
nodes. (See
"Initializing the user
The sanosadmin window opens.
step
17.
"Downloading the 3.0.5
step 18
from
"Installing version
step 16
from
"Installing version
step
20.
database" on page 48.)
Continuous Access Storage Appliance Installation and Maintenance Guide
patch."
3.0.0."
3.0.5."
step
19. If the

Advertisement

Table of Contents
loading

Table of Contents