Miele EVS 7010 Operating And Installation Instructions page 58

Built-in vacuum drawer

Hide thumbs Also See for EVS 7010:

Table of Contents

Installation

Aligning the front of the drawer

After installing the combination appli-

ance, it may be necessary under certain

circumstances to align the front of the

drawer and adjust the gap between the

drawer and the combination appliance.

For this purpose, 2 screws can be

found behind the front of the drawer

which are used to fasten the front to the

housing of the drawer.

 Open the drawer.

 Loosen the retaining screws  on the

right and left of the drawer housing.

Do not remove the screws com-

pletely, as the front may fall off.

 Push the front of the drawer up or

down a little to correct the alignment

and the gap.

 Tighten up the retaining screws.

Table of Contents

Evs 7670 Evs 7010 am