Page 1
Operating instructions Heat pump dryer To avoid the risk of accidents or damage to the appliance it is essen- tial to read these instructions before it is installed and used for the first time. en-GB M.-Nr. 12 032 440...
Operating the sensor controls ................21 Display......................... 21 Examples on how to operate the appliance ............21 Before using for the first time ................22 Miele@home ......................22 Wash2Dry ......................23 Requirements for use ..................23 Downtime after installation.................. 24 Energy saving tips .....................
Page 3
Contents Programme chart ....................39 Programmes on the control panel ............... 39 Further programmes.................... 42 Extras........................45 Gentle tumble ...................... 45 Freshen up......................45 Anti-crease ......................45 Buzzer........................45 Drying programme overview - Extras ..............46 Changing the programme sequence .............. 47 Adding or removing laundry ................
Page 4
Contents Checking the heat exchanger................67 Service........................ 68 Contact in the event of a fault ................68 Optional accessories................... 68 Warranty ......................68 Installation......................69 Front view ......................69 Rear view......................70 Transporting the tumble dryer ................70 Transporting the tumble dryer to its installation site ........70 Installation ......................
/ recycling centre for electrical and electronic ap- pliances, or contact your dealer or Miele for advice. You are also respons- ible for deleting any personal data that may be stored on the appliance being disposed of. Please ensure that your old appliance poses no risk to children while being stored prior to disposal.
Any other applications may be dangerous. Miele cannot be held li- able for damage resulting from incorrect or improper use or opera-...
Page 8
Warning and Safety instructions This tumble dryer can only be used by people with reduced phys- ical, sensory or mental capabilities, or lack of experience or know- ledge, if they are supervised whilst using it or have been shown how to use it in a safe way and understand and recognise the con- sequences of incorrect operation.
Page 9
It is essential that this standard safety re- quirement is met. If in any doubt, please have the household wiring system tested by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).
Page 10
Miele replacement parts are used. Unauthorised repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be undertaken by a Miele approved service technician, otherwise any subsequent damage will not be covered by the warranty.
Page 11
Warning and Safety instructions Heat pump technology and refrigerant: this tumble dryer uses a gaseous refrigerant which is condensed by the compressor. The refrigerant, which is brought to a higher temper- ature level and liquefied by condensing, is led in a closed circuit through the heat exchanger unit where heat exchange with the circu- lating drying air takes place.
Page 12
This special lamp must only be used for the purpose it is intended for. It is not suitable for room lighting. Replacement lamps may only be fitted by a Miele authorised person or the Miele Service Department.
Page 13
Warning and Safety instructions Correct use Do not install the tumble dryer in a room where there is a risk of frost occurring. At temperatures around freezing point the tumble dryer may not be able to operate properly. There is a risk of damage if the condensed water is allowed to freeze in the pump and hoses.
Page 14
Warning and Safety instructions To prevent the risk of fire, the following textiles must not be dried in this tumble dryer: - Items which have not been washed. - Items, such as workwear, which have not been thoroughly cleaned and which are still soiled with grease, oil or other depos- its (such as cosmetics, lotions etc).
Page 15
Warning and Safety instructions To prevent the risk of fire, the following textiles must not be dried in this tumble dryer: - Items which have been cleaned using chemicals (e.g. professional dry-cleaning agents). - Items which contain a large proportion of rubber, foam rubber or rubber-like materials.
Page 16
Warning and Safety instructions The tumble dryer must not be used without fluff filters or - with damaged fluff filters, or - with a damaged plinth filter. This would cause an excessive build-up of fluff which in turn would cause a fault.
Page 17
Warning and Safety instructions Using a fragrance flacon (optional accessory) Only use genuine Miele original fragrance flacons. The fragrance flacon must be stored in its packaging so please make sure you retain this. Caution. The fragrance can leak out of the flacon. Make sure that...
Page 18
If you order a plinth for this tumble dryer (available from Miele as an optional accessory - depending on country), make sure it is the correct one.
Operating the tumble dryer Control panel a Control field d OK sensor The control field consists of a dis- The OK sensor is used for confirm- play and various sensor controls. ing selected values. The individual sensors are explained e PerfectDry indicator in the following sections.
Page 20
Operating the tumble dryer f Optical interface j Start/Add laundry sensor control This is used by the Service depart- Touching the Start/Add laun- ment as a transmission point. dry sensor control starts a pro- gramme. The current programme g Sensors for extra options can be interrupted to add laundry.
Operating the tumble dryer Touching the sensor scrolls down the Operating the sensor controls list to the next option and touching the The sensor controls react to fingertip sensor scrolls up the list to the next contact. Selection is possible as long option.
- a WiFi network Therefore, the availability of featured functions cannot be guaranteed. - the Miele app - a Miele user account. The user ac- Miele@home availability count can be created via the Miele The ability to use the Miele app de- app.
Tip: Set up Miele@home as described well as transferring it to the Miele in “Before using for the first time”. Cloud. The tumble dryer automatically sets a...
Before using for the first time Confirm your selection of the lan- Downtime after installation guage by touching the OK sensor. Damage to the tumble dryer by switching it on too soon. This can damage the heat pump. After setting up the tumble dryer wait for at least one hour before switching it on.
Page 25
Set up now Connection OK To set up Miele@home now: Touch the OK sensor control. Confirm with OK. To postpone setup until later: Touch the sensor control until Continue with setting up...
Energy saving tips - If possible, make use of time-vari- Energy saving tips able, low-cost electricity tariffs. Ask This dryer with heat-pump technology your energy supplier for information. is designed for energy-saving drying Your tumble dryer's delay start func- cycles. However, you can save a little tion will be useful as you can select more energy with the following meas- when during the next 24 hours you...
Energy saving tips 2. Viewing the actual consumption Feedback The actual energy consumption can be You can view information about the en- viewed during the programme or at the ergy consumption of your tumble dryer end of the programme. with the sensor. ...
1. Notes on correct laundry care Points to note regarding Risk of fire due to incorrect use washed laundry and operation. The laundry can burn and destroy - When washing very heavily soiled the dryer and the surroundings. items ensure that you use sufficient See “Warning and Safety”...
1. Notes on correct laundry care Care label symbols Drying Tip: See the “Programme chart”. Drying It lists all programmes and their max- Normal/higher temperature imum load. Low temperature* - Always observe the maximum recom- mended load for each programme. * Select Gentle tumble This will mean that the energy con- ...
2. Selecting a programme Switching on the tumble dryer Selecting a programme The dryer is switched on by selecting a There are three possible ways to select programme, and switched off by turning a programme: the programme selector to the posi- 1.
Page 31
2. Selecting a programme 2. Selecting programmes via the Selecting the Wash2Dry function “Further programmes/” setting and the display Wash2Dry Confirm the function with the OK sensor control. Please wait lights up in the display of the tumble dryer while the wash pro- gramme is running.
Page 32
2. Selecting a programme 3. Selecting programmes via the Mo- bileStart programme selector pos- ition and the Miele@mobile app Tip: In order to use MobileStart , the tumble dryer must be logged on to the WiFi network and must Remote control be switched on.
3. Loading the tumble dryer 2 positions for inserting fragrance Loading the laundry flacons Preventing damage to fabrics. The “Fragrance flacon” chapter de- Before loading the dryer, read “1. scribes how to use the fragrance Notes on correct laundry care”. flacon.
4. Selecting programme settings Setting the delay start time Selecting an extra option Touch the sensor. Freshen up Gentle tumble The following will appear in the display: Anti-crease Buzzer Start in Touch a sensor control to select the desired extra option.
Page 36
4. Selecting programme settings The selected delay start time has been Setting the timeframe cancelled. If you have activated the SmartGrid function in Settings, SmartStart in After the programme has started, the stead of will appear in the dis- Start in selected delay start time can only be play when you touch the ...
5. Starting a programme The drying level reached for the selec- Starting the programme ted drying level programme will light up Touch the flashing Start/Add laundry in the display. sensor control. You can view the selected drying level or time again: The Start/Add laundry sensor control will light up and Drying appears in the ...
6. End of programme - unload the drum Turn the programme selector to the End of programme position. The programme is finished when Finish/ Remove the fluff from the 2 fluff filters Anti-crease Finished appears in the in the door opening: see “Cleaning display.
Programme chart All weights marked with * are based on the weight of dry laundry. Programmes on the control panel Cottons max. 9 kg* Use for Cotton items such as those described under Cottons Normal with normal residual moisture. Note - Items are dried to a Normal level only in this programme. - The Cottons ...
Normal +, Normal, Slightly dry, Hand iron , Hand iron Use for All shirts and blouses. MobileStart The Miele app is used for selecting programmes and operating the appliance. Denim max. 3 kg* Normal +, Normal, Slightly dry, Hand iron , Hand iron Use for All the denim garments, e.g., jackets, jeans, shirts, and skirts.
Programme chart Proofing max. 2.5 kg* Use for Fabrics suitable for tumble drying, e.g. microfibre fabrics; skiwear; outdoor clothing; fine, close-weave cotton garments (poplin); and tablecloths. Note - With this programme, items can only be dried to the Normal level. - This programme includes an additional proofing fixing phase. - Only use proofing agents which are stated by the manufacturer as being “suitable for use on membrane fabrics”.
Programme chart Further programmes Wash2Dry The programme is selected automatically in conjunction with the programme se- lection on the connected washing machine. Warm air max. 9 kg* Use for - Multi-layered fabrics whose layers have different drying character- istics, e.g. jackets, pillows, sleeping bags and other bulky items. - For drying individual items, e.g.
Any item which only needs airing. Basket programme Max. load for basket 3.5 kg Note - This programme may only be used with the Miele tumble dryer basket TRK 555 (optional accessory) fitted. - Always follow the operating instructions for the tumble dryer bas- ket.
Programme chart Silks handcare max. 1 kg* Use for Silk garments which are suitable for drying in the tumble dryer, e.g. blouses and shirts Note - This programme reduces creasing. Items are not dried completely by this programme. - Remove the garments as soon as the programme has finished. DryFresh max. 9 kg* Use for...
Extras Anti-crease The drying programmes can be aug- mented with various extra options. After the programme has finished, the However, Freshen up and Gentle drum will continue to rotate in a certain tumble cannot be combined. rhythm. This “Anti-crease rhythm” helps to prevent creasing, if the laundry is not Freshen up Gentle tumble...
Changing the programme sequence Changing a programme once it Adding or removing laundry has started You have forgotten something but the programme is already running. It is no longer possible to change the selected programme. This is to prevent Touch the Start/Add laundry sensor the operation of the machine being control.
Condensed water container Emptying the condensed water container The condensed water is collected in the condensed water container. Empty the condensed water container after every drying programme. When the maximum level in the con- densed water container is reached, the following message will light up in the display: Empty container.
Fragrance flacon FragranceDos Removing the protective seal from the fragrance flacon Fragrance flacons (optional accessor- ies) can be used to give your laundry a Only hold the fragrance flacon as il- pleasant scent. lustrated. Do not hold it at an angle or tip it, as the fragrance will leak out This dryer has 2 places for inserting of it.
Fragrance flacon Inserting the fragrance flacon Open the door of the tumble dryer. The fragrance flacon is inserted in the upper fluff filter. They can be fitted on the left and the right hand side next the opener. Insert the fragrance flacon into the socket as far as it will go.
Fragrance flacon grance will also be noticeable in the room air during the process. The Cool Air programme will not generally apply fragrance. Closing the fragrance flacon After drying, the fragrance flacon should be closed to prevent the fragrance from escaping needlessly.
- Always store in a cool, dry place Fragrance flacons are available to or- away from direct sunlight. der from Miele or online at www.miele- - When purchasing new fragrance flac- shop.com. ons, only remove the protective seal...
Cleaning and care Removing visible fluff Fluff filters Tip: You can also use a vacuum cleaner This tumble dryer has 2 fluff filters in the so that you can remove the fluff without loading area of the door. Both fluff fil- touching it.
Cleaning and care Remove the fluff from the filter sur- Turn the yellow dial on the lower fluff face of all the fluff filters and the per- filter in the direction of the arrow (until forated laundry deflector. it reaches the stop position).
Cleaning and care Cleaning the fluff filters with water Wipe the smooth plastic surfaces of the fluff filters with a damp cloth to clean them. Flush the filters through under warm running water. Shake the fluff filters thoroughly and then dry them carefully.
Cleaning and care Cleaning the plinth filter Clean the plinth filter when the pro- gramme running time is longer than usual or if the following message lights up in the display: Clean the plinth filter. See To clear the message, confirm with Removing the plinth filter ...
Cleaning and care Cleaning the plinth filter Fit the plinth filter back on the handle. Make sure it is the correct way round. Pull the handle out of the plinth filter. Clean the plinth filter thoroughly un- der running water.
Cleaning and care Cleaning the plinth filter access panel Cleaning the dryer Disconnect the tumble dryer from the electrical supply. Damage due to the use of un- suitable care products. Unsuitable care products could dam- age plastic surfaces and other parts. Do not use any solvents, abrasive cleaners, glass cleaners, or all-pur- pose cleaners.
Problem solving guide Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed. The following guide may help you to find the reason for a malfunction or a fault, and to correct it.
Page 60
Problem solving guide Message Cause and remedy The system has been clogged by fluff or detergent Clean the plinth filter. residue. See lights up To switch off the message: confirm after a pro- gramme has Clean all fluff filters and the plinth filter. been cancelled.
Page 61
Switch the dryer off and then on again. lights up after a pro- Start a programme. gramme has If the programme terminates again with the same er- been cancelled. ror message, then there is a fault. Contact Miele.
Problem solving guide Unsatisfactory drying results Problem Cause and remedy The laundry is not suffi- The load consisted of different types of fabric. ciently dry. Finish drying using the Warm air programme. Select a more suitable programme next time. Tip: You can alter the residual moisture level for some programmes.
Problem solving guide The drying cycle duration is very long Problem Cause and remedy The drying process The room where the tumble dryer is located is too goes on too long or warm. even switches off.* Ventilate the room thoroughly. Detergent residues, hair and fine fluff can clog the fil- ters.
Problem solving guide General problems with the tumble dryer Problem Cause and remedy You can hear operating This is not a fault. noises (buzzing/hum- The compressor (heat pump) is operating. ming). No action required. These noises are quite normal and can be heard when the compressor is operat- ing.
Problem solving guide Deformations Replacing the plinth filter The heat exchanger can clog up. Replace the plinth filter immediately if you see the following signs of wear before or after cleaning (optional ac- cessory). Poor fit Deformations indicate that the filter has become blocked and worn by continu- ous use.
Page 66
Problem solving guide Cracks, tears, indentations White residues or residues of other col- ours These residues arise from laundry fibres and traces of detergent components. They can be found on the front and side edges of the plinth filter. In extreme cases, they can form stubborn crust.
Problem solving guide Reactivating the plinth filter Checking the heat exchanger You can reactivate one or more soiled Risk of injury from sharp cooling plinth filters in a washing machine. You fins. will then be able to use the plinth filter You could cut yourself.
Optional accessories In the event of any faults which you Optional accessories for this tumble cannot remedy yourself, please contact dryer are available from Miele or from your Miele dealer or the Miele Customer your Miele dealer. Service Department. You also can order these and many...
*INSTALLATION* Installation Front view a Mains connection cable e Heat exchanger access panel – do not open during drying b Control panel f Four height adjustable screw feet c Condensed water container g Cool air intake grille – empty after every drying cycle –...
*INSTALLATION* Installation Rear view If the tumble dryer is being transpor- ted on its side, it must be tipped onto its left or right side. a Protruding lid for holding when mov- If the tumble dryer is being transpor- ing the tumble dryer (see arrows) ted upright and you are using a hand b Drain hose for condensed water...
*INSTALLATION* Installation Downtime after installation Installation Damage to the tumble dryer by Levelling the dryer switching it on too soon. Ensure that no closeable door, slid- This can damage the heat pump. ing door, or an oppositely hinged After setting up the tumble dryer wait door is installed that would hinder for at least one hour before switching the door of the dryer being opened in...
– Washer-dryer stack heat. The tumble dryer can be combined with Make sure there is adequate room a Miele washing machine in a washer- for warm air from the dryer to be dir- dryer stack. The appropriate Miele ected away.
*INSTALLATION* Installation Installation conditions requiring a External condensed water out- non-return valve Danger of condensed water Note back-flow. When drying is in progress, con- Water could flow back into the densed water is pumped into the con- tumble dryer or be drawn into it. densed water container through the Back-flow water could damage the drain hose which is located at the...
*INSTALLATION* Installation Arranging the drain hose Examples Drainage into a sink or floor gully Damage to the drain hose through incorrect handling. Use the hose holder to secure the drain hose. The drain hose can suffer damage and leak. Do not pull on the drain hose and do not stretch it or allow it to become kinked.
Page 75
*INSTALLATION* Installation Fit adapter 1 to the sink drain outlet Direct connection to a sink drain outlet using nut 2. Use the hose holder, the adapter, the The nut is usually fitted with a washer hose clips and the non-return valve which must be removed.
Miele product must also be maintained in isolated operation or in operation that The electrical system must comply with is not synchronised with the mains...
Technical data Height 850 mm Width 596 mm Depth 636 mm Depth with door open 1054 mm Height for building under 820 mm (+8/-2 mm) Width for building under 600 mm Depth for building under 600 mm Suitable for pushing under a worktop Suitable for stacking Weight Approx. 62 kg Drum volume 120 litres Load size...
Technical data Data sheet for household tumble driers In acc. with delegated regulation (EU) No. 392/2012 MIELE Model name/identifier TEJ665WP 9,0 kg Rated capacity Type of tumble drier (Air-vented / condenser) - / ● Energy efficiency class A+++ (most efficient) to D (least efficient)
Page 79
Technical data If the household tumble drier is equipped with a power management system. This programme is suitable for drying normal wet cotton laundry and is the most efficient programme in terms of energy consumption for cotton. If the household tumble drier is a condenser tumble drier. For the standard cotton programme at full load.
UK Conformity declaration Miele hereby declares that this heat-pump tumble dryer complies with UK Radio Equipment Regulations 2017, as amended. The complete text of the UK declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.co.uk...
Settings Selecting settings Accessing the settings menu Touch the or sensor until the You can alter the tumble dryer's elec- setting you want appears in the dis- tronics to suit changing requirements play. with the settings. The settings can be altered at any - The ...
Settings Language Cooling down temp. The display can be set to appear in The laundry will be cooled down auto- one of several different languages. matically before the end of the pro- gramme. The automatic cooling-down The flag after the word Language phase which takes place before the (Sprache in German) acts as a guide in end of a programme can be set at a...
Settings Keypad tone Airways indicator Each touch of a sensor is confirmed Fluff should be removed after drying. with an audible tone. In addition, this indicator will remind you to clean the filters when a certain Selection amount of fluff has collected in them: ...
Settings Conductivity Consumption This setting is only relevant for regions You can display the total consump- with very soft water. tion. Selection Very soft water can result in unsatis- factory drying results. Previous programme You should only select this setting if Displays energy consumption in the the water used for washing the laun- last programme run...
Make a note of your new code. If Buttons inactive you forget the code, the dryer will need to be unlocked by Miele Tech- Controls the brightness of the sensor nical Service. controls that can be activated. - (dark) - ...
Settings Disp. switch-off stat. Memory To save energy, the display and The dryer saves the settings that were sensor controls will go out after selected last for a drying programme 10 minutes. The Start/Add laundry (drying stage and/or extra option, or button flashes slowly.
WiFi network. A new connection has to be established Please refer to “Before using for the first in order to use Miele@home again. time” for instructions on how to set up the connection. –...
Miele@home setting is set up and and activated. activated. Once the Miele@mobile app has been This function can be used for starting installed on your mobile device, you your tumble dryer automatically at a can check the status of your tumble...
If you do not install a RemoteUpdate, stalled, it cannot be undone. you can continue to use your tumble dryer in the usual way. However, Miele - Do not switch off the tumble dryer recommends installing RemoteUpdates. during a RemoteUpdate. Otherwise,...
Page 91
United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: info@miele.co.uk Australia Ireland South Africa Miele Australia Pty. Ltd. Miele Ireland Ltd. Miele (Pty) Ltd. ACN 005 635 398 2024 Bianconi Avenue...