Table of Contents
Advertisement
Calculating the countertop cut-out
The frames of the ProLine elements overlap the countertop at the outside right
and left by 5/16" (8 mm) on each side.
Add up the widths of the ProLine elements and subtract 5/8" (16 mm) from this
sum.
Example:
11 5/16" + 11 5/16" + 14 15/16" = 37 5/8" - 5/8" = 37"
(288 mm + 288 mm + 380 mm = 956 mm - 16 mm = 940 mm)
The ProLine elements are 11 5/16", 14 15/16" or 22 11/16" (288 mm, 380 mm or
576 mm) wide depending on the model (see "Installation" – "Installation dimen-
sions").
Spacer bars
When installing several ProLine elements, a spacer bar must be installed between
the individual appliances. The position for securing the spacer bar will depend on
the width of the ProLine element.
Installation with a countertop extractor
Please refer to the "Countertop extractor with ProLine elements" operating and in-
stallation instructions for details about countertop cut-out dimensions and in-
stalling spacer bars.
Installation
31
Advertisement
Table of Contents
