Table of Contents
Advertisement
Installation
Installation with a countertop extrac-
tor
Please refer to the "Countertop extrac-
tor with ProLine elements" operating
and installation instructions for details
about installing the countertop extractor
and the ProLine elements.
Installing the ProLine element
Feed the power cord down through
the cut-out in the countertop.
Starting at the front, position the Pro-
Line element in the cut-out.
Using both hands, press down evenly
on the sides of the ProLine element
until it clicks into position. When do-
ing this make sure that the seal of the
appliance sits flush with the counter-
top on all sides. This is important to
ensure an effective seal all round.
Do not use any additional sealant
(e.g., silicone) on the ProLine ele-
ment.
If during installation the seal around
the frame does not sit flush with the
countertop in the corners, the corner
radius (≤ R4) can be carefully filed
down to fit.
34
Installing several ProLine elements
Push the built-in ProLine element to
the side until the holes in the spacer
bar can be seen.
b
Push the cover into the designated
holes in the spacer bar .
Starting at the front, position the next
ProLine element in the countertop
cut-out.
Proceed as described previously.
a
Advertisement
Table of Contents
