Table of Contents
Advertisement
Installing several refrigeration
appliances
Risk of damage due to condens-
ation on external appliance panels.
In environments with high humidity,
condensation can build up between
the external refrigeration appliance
panels, which can cause corrosion.
Do not place different refrigeration
appliances directly next to one an-
other.
Changing the door hinging
Danger of injury and damage
when changing the door hinging.
There is an increased danger of in-
jury and damage if the door hinging
is installed by a single person.
Always change the door hinging with
the help of a second person.
The refrigeration appliance is supplied
with hinges on the right. If left-hand
hinging is required, the hinges must be
changed (see accompanying installation
instructions).
Wall spacers
The wall spacers on the back of
your refrigeration appliance are de-
signed to ensure that the declared en-
ergy consumption is achieved. They
also prevent the build-up of condens-
ation at high ambient temperatures.
Fitting wall spacers increases the
depth of the refrigeration appliance by
approx. 20 mm.
Risk of damage as a result of in-
correct handling.
The wall spacers must not be fitted
when the refrigeration appliance is
laid on its back.
Remove the wall spacers from the
back of the appliance.
The refrigeration appliance does not
require wall spacing at the side. All
drawers and shelves can still be pulled
out.
Installation
19
Advertisement
Table of Contents
