Table of Contents
Advertisement
Technical Information
4.43
Compressor Installation
1. Screw in the retaining screw at the front left. See Figure 030-77, Item 1.
2. Press the rubber seal into the compressor holder. See Figure 030-77,
Item 2.
3. Coat the rubber seal with a lubricant (such as liquid dish detergent).
4. Install the compressor. Refer to Figure 030-77 for positioning.
5. Secure the compressor into position.
Figure 030-77: Compressor Installation
4.44
Installing the RemoteVision Module
Note:
Always disconnect the appliance from the power supply when performing
installation, maintenance or service work.
Note:
Install the RemoteVision module before installing the appliance in its niche.
The slot for the RemoteVision module is located in the lower area of the back
of the appliance.
1. Unscrew the screws (Figure 030-78, Item 1) on the cover (Figure 030-78,
Item 2) and pull off the sticker (Figure 030-78, Item 3).
72
KF 18xx/19xx
Advertisement
Table of Contents
