hit counter code
Compaq N150 Series Hardware Manual
  1. Manuals
  2. Brands
  3. Compaq Manuals
  4. Laptop
  5. N150 Series
  6. Hardware manual
Compaq N150 Series Hardware Manual

Compaq N150 Series Hardware Manual

Hardware guide compaq evo notebook n150 series
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
b
Hardware Guide
Compaq Evo Notebook N150 Series
Part Number: 233050-001
May 2001
This guide provides comprehensive information on setting up the
computer hardware and software, identifying computer
components, using the battery pack, connecting external devices,
and adding upgrades and accessories.

Advertisement

Table of Contents
loading

Related Manuals for Compaq N150 Series

Summary of Contents for Compaq N150 Series

  • Page 1 Hardware Guide Compaq Evo Notebook N150 Series Part Number: 233050-001 May 2001 This guide provides comprehensive information on setting up the computer hardware and software, identifying computer components, using the battery pack, connecting external devices, and adding upgrades and accessories.
  • Page 2 All other product names mentioned herein may be trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided “as is” without warranty of any kind and is subject to change without notice. The warranties for Compaq products are set forth in the express limited warranty statements accompanying such products.

  • Page 3: Table Of Contents

    1 Hardware and Software Setup Setting Up the Hardware ......1–1 Setting Up the Software ......1–6 Completing Initial Setup .
  • Page 4 Contents 4 Battery Packs Charging Battery Packs ......4–1 Using a New Battery Pack ......4–2 Replacing the Primary Battery Pack .
  • Page 5 Connecting a Parallel Printer ..... . 7–3 Connecting Infrared Equipment....7–3 Infrared Connection Guidelines.
  • Page 6 Contents 10 Computer Utilities Using the PhoenixBIOS Setup Utility ....10–1 Power Management ......10–1 Enabling Power Savings .

  • Page 7: Hardware And Software Setup

    Hardware and Software Setup Setting Up the Hardware 1. Record the Product Key for your operating system. You will need to enter or verify this number during software setup. You may also need it to update or troubleshoot your operating system.
  • Page 8 Hardware and Software Setup 2. Locate the battery pack in the shipping box. If tape is covering the battery contacts, remove it before installing the battery pack. 3. Install the battery pack into the battery compartment. a. Turn the computer bottom side up. b.
  • Page 9 AC Adapter 2 and into an electrical outlet 3. Power cords and electrical outlets vary by country. Connecting the AC Adapter and power cord Hardware Guide Hardware and Software Setup Compaq Notebook Products Reference Regulatory and 1–3...
  • Page 10 Hardware and Software Setup 6. Open the computer by sliding the display latch to the right 1 and raising the display 2. Opening the computer 1–4 Hardware Guide...
  • Page 11 7. Turn on the computer by pressing the power button 1. Turning on the computer When power is turned on: The power/standby light 2 turns on. The battery pack in the battery compartment begins to charge and the battery light 3 turns on. The battery light: Remains on while the battery pack is charging.

  • Page 12: Setting Up The Software

    An operating system available during initial setup is enhanced by Compaq. When an operating system is deleted, the enhancements are also deleted. During the setup process, you must accept the End User License Agreement to continue.

  • Page 13: Installing Optional Applications

    C:\cpqapps\setup.exe preload /s To view the descriptions and space requirements of preloaded Compaq utilities without installing them, select the Setup Compaq Software icon on the Desktop, then select Next. After viewing the utility information, select Cancel. After Software Setup After the initial setup is complete, you may want to: Calibrate the battery pack.
  • Page 14 Hardware and Software Setup Å WARNING: To reduce the risk of personal injury, electric shock, fire, or damage to the equipment: Disconnect power from the equipment by unplugging the power cord from the electrical outlet. Do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them.

  • Page 15: Look At The Computer

    A Look at the Computer Front Components Hardware Guide 2–1...

  • Page 16: Front Components

    A Look at the Computer Front Components Component Stereo line-out/headphone jack Stereo line-in jack Power light Battery light Hard drive 2–2 Function Connects stereo speakers, headphones, headset, or television audio. Connects a CD player, turner, or tape deck. On: Power is turned on. Blinking: Computer is in Standby.

  • Page 17: Top Components

    Top Components Top Components Component Power button Microphone Easy Access Buttons Stereo Speakers (2) Hardware Guide A Look at the Computer Function Turns on the computer.To turn off the computer, use the operating system Shut Down command. Inputs single-channel sound to the computer;...
  • Page 18 A Look at the Computer Top Components Component Windows application key TouchPad and TouchPad buttons Windows logo key 2–4 Function Displays the shortcut menu for the item beneath the pointer. Moves the cursor, selects and activates. The right and left buttons function like buttons on an external mouse.
  • Page 19 Top Component Lights Component Drive light indicator Diskette drive light Num lock light Caps lock light Hardware Guide A Look at the Computer Function Turns on when the hard drive, CD, or DVD is accessed. Turns on when the diskette drive in the Media Bay or the optional external diskette drive is accessed.
  • Page 20 A Look at the Computer Top Component Lights Component Scroll lock light Power light Battery charge light 2–6 Function On: Scroll is on. On: Power is turned on. Blinking: Computer is in Standby. The power light also blinks if a battery pack that is the only available power source reaches a low-battery condition.

  • Page 21: Right Side Component

    Right Side Component Right Side Component Component Media Bay Hardware Guide A Look at the Computer Function Accepts a CD-ROM, CD-RW, DVD, diskette drive, or second battery pack. 2–7...

  • Page 22: Left Side Components

    A Look at the Computer Left Side Components Left Side Components Component Security slot Vent Air intake vent 2–8 Function Attaches an optional security cable to the computer. Allows airflow to cool internal components. Ä CAUTION:To prevent damage, the system will shut down if a severe overheating condition occurs.
  • Page 23 Left Side Components Component RJ-11 jack (internal modem models only) USB connector PC Card slots (2) PC Card eject buttons Hardware Guide A Look at the Computer Function Connects the modem cable to an internal modem. A modem cable is included with internal modem models.

  • Page 24: Rear Panel Components

    A Look at the Computer Rear Panel Components Rear Panel Components Component Infrared port Parallel connector Serial connector Keyboard/mouse connector RJ-45 jack (network models only) 2–10 Function Links to another IrDA-compliant device for wireless communication. Connects a parallel device. Connects a serial device. Connects an external keyboard or PS/2-compatible external mouse.
  • Page 25 Rear Panel Components (Continued) Component USB connector External monitor connector DC power jack Hardware Guide A Look at the Computer Function Connects USB devices. Connects an external monitor or microportable projector. Connects any one of the following: AC Adapter Optional Automobile Power Adapter/Charger Optional Aircraft Power Adapter 2–11...

  • Page 26: Bottom Components

    Reset button 2–12 Function Releases the media bay device from the connector. Identifies the computer; needed when you call Compaq customer support. Provides airflow to cool internal components. Manually resets the system if a failure occurs. Å WARNING: Resetting the computer will cause unsaved information to be lost.
  • Page 27 Bottom Components (Continued) Component Memory expansion compartment cover Hard drive Battery security latch Battery release latch Battery compartment Media Bay Hardware Guide A Look at the Computer Function Covers the memory expansion compartment that contains a memory expansion slot for one memory expansion board.

  • Page 28: Additional Standard Components

    A Look at the Computer Additional Standard Components The components included with the computer vary by geographic region and the computer hardware configuration ordered. The following illustration and table identify the standard components included with most computer models. Some components ship inside computer compartments identified in previous sections and are not included in this illustration.
  • Page 29 Additional Standard Components (Continued) Component QuickRestore kit Notebook Products Reference Library CD-ROM Modem cable (internal modem models only) Country-specific modem adapter (included with internal modem models by region as required) Hardware Guide A Look at the Computer Function Contains the software preinstalled on the computer.

  • Page 30: Keyboard And Pointing Devices

    Keyboard and Pointing Devices Using the TouchPad The TouchPad performs the same basic operations as a mouse. It functions with any software that supports a Microsoft-compatible mouse. The TouchPad 1 includes left 2 and right 3 TouchPad buttons for function or application selection. To operate the TouchPad, slide your finger across its surface in the direction you want to move the cursor and click the left or right button to make a selection or complete an activity.

  • Page 31: Using Hotkeys

    Keyboard and Pointing Devices Using Hotkeys Hotkey Quick Reference Function Switch display and image (switching between the display and external monitor) Standby Adjusts screen brightness 3–2 Hotkey Fn+F3 Fn+F4 Fn+F7 (decrease) Fn+F8 (increase) Return to Original State Fn+F3 Press the power button Fn+F8 (increase) Fn+F7...

  • Page 32: Hotkeys

    Hotkeys Hotkeys are preset combinations of the that access or execute frequently used system functions. The icons on the function keys Hotkeys can be used at anytime and from within any application. Identifying the Hotkeys Switch Display and Image (Fn+F3) Microsoft Windows Millennium Edition (Me) or Windows 98 with Extended Desktop disabled—Toggle to switch the image among...
  • Page 33 Keyboard and Pointing Devices Microsoft Windows Me or Windows 98 with Extended Desktop enabled—Press display connected to the external monitor connector and to disable Extended Desktop. Microsoft Windows 2000 Professional—Toggle switch the image among Computer display External display Simultaneous display (computer and external displays) The external monitor can be connected through the external monitor connector.

  • Page 34: Using The Embedded Numeric Keypad

    Using the Embedded Numeric Keypad The embedded numeric keypad consists of a cluster of 15 keys 1. The character in the upper right corner of each of the keys indicates the keypad function of that key. The standard keyboard functions of the keys in the keypad are disabled when the keypad is enabled.

  • Page 35: Disabling The Numeric Keypad

    Keyboard and Pointing Devices Disabling the Numeric Keypad To disable the keypad and return the keys to their standard keyboard functions, press Converting the Numeric Keypad Keys to Standard Keys To use the keypad keys temporarily as standard keys while the keypad is enabled: Press and hold Press and hold...
  • Page 36 Keyboard and Pointing Devices Identifying the Easy Access buttons Hardware Guide 3–7...

  • Page 37: Battery Packs

    Charging Battery Packs The computer supports up to two battery packs: a primary battery pack located in the battery compartment and an optional battery pack in the Media Bay. When both battery packs are used, the system charge and discharge in a preset sequence: Charge sequence: 1—Primary battery pack 2—Optional Media Bay battery pack...

  • Page 38: Using A New Battery Pack

    Battery Packs Using a New Battery Pack Charge the installed battery pack while connected to an external power source. A new battery pack should be fully charged before it is used for the first time. The battery pack will work without being fully charged, but the battery gauge will not show an accurate charge until the battery pack receives its first full charge.
  • Page 39 Battery Packs Removing the battery pack Hardware Guide 4–3...

  • Page 40: Installing Or Removing The Optional

    Battery Packs 6. To insert the new fully charged battery pack, angle the battery pack into the compartment at a 45-degree angle so that the battery tabs are aligned with the tabs inside the compartment 1. Press down on the battery pack until it is fully seated and the battery release latch clicks 7.
  • Page 41 If running Windows 2000, select the unplug or eject hardware icon on the Windows system tray in the lower right corner of the screen. A message will display when it is safe to remove the device. Select okay at the message prompt. 2.

  • Page 42: Using The Battery Quick Charge Check

    Battery Packs Using the Battery Quick Charge Check If your battery pack has a battery quick check feature, you can monitor the charge in the battery pack when the battery pack is not in the computer. To display the percent of a full charge remaining in a battery pack, press the button 1on the battery pack.
  • Page 43 a. Turn on or restart the computer. Press startup to run the PhoenixBIOS Setup Utility (PSU). From the Security menu in PSU, enable “Battery Calibration.” Save your setting and select exit from PSU. b. Restart the computer and allow the battery pack to charge until the battery charge light turns off.

  • Page 44: Storing A Battery Pack

    Regulatory and Safety Notices guide on the Notebook Products Reference Library CD. If your region is not covered, refer to the Worldwide Telephone Numbers guide included with the computer to contact your Compaq authorized dealer, reseller, or service provider. 4–8 Hardware Guide...

  • Page 45: Drives

    The computer supports the following drives that allow you to store and access data: Removable primary hard drive One of the following in the Media Bay: CD drive DVD drive Diskette drive Optional external diskette drive Caring for Drives To avoid unexpected loss of information caused by virus or accidents, regularly back up the information on a hard drive.

  • Page 46: Removing And Inserting The Hard Drive

    Drives Removing and Inserting the Hard Drive Ä CAUTION: To prevent damage to the computer and hard drive and loss of information, ensure that you are discharged of static electricity before handling a drive. Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in Standby, or in Hibernation.

  • Page 47: Inserting Or Removing A Media

    7. To insert a hard drive, slide the hard drive into the bay until it is firmly seated in the connector and the bezel is flush with the computer. 8. Reinstall the screws securing the hard drive. 9. Turn the computer top side up, open the display, and press the power button to resume operation.

  • Page 48: Connecting The Optional External Diskette Drive

    Drives Removing a Media Bay drive 5. Slide the new drive into the Media Bay until it clicks into place. 6. Turn the computer top side up and open the display. If running Windows 98 or Windows Me, turn on the computer. 7.

  • Page 49: Removing And Inserting Storage Media

    Connecting the external diskette drive 3. To disconnect the drive, remove the diskette, if installed, from the drive. 4. Unscrew the drive cable from the parallel port on the rear of the computer. Removing and Inserting Storage Media Inserting and Removing a Diskette To insert a diskette into the diskette drive, hold the diskette with the label facing up and the arrow on the diskette pointing toward the drive and gently push the diskette into the drive.

  • Page 50: Inserting A Disc Into The Cd Or Dvd Drive

    Drives Inserting a Disc into the CD or DVD Drive 1. Turn on the computer. 2. Press the eject button on the front panel of the media tray to open it. Opening the media tray 3. Slowly pull out the tray. 4.

  • Page 51: Viewing The Cd

    Viewing the CD When autorun is enabled, the CD contents will be displayed on the screen. If autorun is not enabled: 1. Click Start > Run, then type: X:\program\autorun.exe (where X = your CD drive designation) 2. Select the OK button. Removing a Disc from the CD or DVD Drive 1.

  • Page 52: Changing The Startup Sequence

    Drives Changing the Startup Sequence The computer can start up from most bootable media or devices. A bootable medium or device contains files needed by the computer to start up and operate properly. When more than one bootable medium or device is in the system, the computer selects the medium or device to start from by searching sequenced locations.

  • Page 53: Audio

    Using Audio Features The computer provides the following external audio features, which are described in the following “Audio Components” table. Identifying audio features Hardware Guide Audio 6–1...

  • Page 54: Connecting To The Stereo Line-Out/Headphone Jack

    Audio Audio Components Component Microphone Stereo speakers Stereo line-in jack Stereo line-out/headphone jack Connecting to the Stereo Line-Out/Headphone Jack When connecting a device to the stereo line-out jack: Use only a 3.5-mm stereo plug. Use 32-ohm headphones and at least 8-ohm external speakers for best sound quality.

  • Page 55: Connecting To The Stereo Line-In Jack

    Connecting to the Stereo Line-In Jack When connecting an external stereo player, such as a CD player, stereo tuner, or tape deck to the line-in jack: Input device must have a 3.5-mm stereo plug. Line input levels of 4.25 volts to 9.5 volts must be supplied, which meet the line output specifications of most stereo players.

  • Page 56: External Device Connections

    External Device Connections External devices can be physically connected to the computer. In addition, some computer models can provide connections between infrared equipped devices. Refer to “A Look at the Computer” section in this guide to locate the connectors on your computer.

  • Page 57: Connecting An External Monitor

    External Device Connections Connecting an External Monitor Ä CAUTION: To prevent damage to the computer, turn off the monitor before connecting it to the computer or disconnecting it from the computer. To prevent damage to the computer display, do not place an external monitor or any other object on top of the computer when the computer is closed.

  • Page 58: Connecting A Parallel Printer

    The Microsoft Windows operating system should prompt you to set up the printer before printing for the first time. If setup fails, consult the printer documentation for information and instructions on device driver. Connecting a Parallel Printer 1. Turn off the printer. 2.

  • Page 59: Infrared Connection Guidelines

    External Device Connections Communicating with infrared Infrared Connection Guidelines Be sure the infrared ports on both devices are turned on and facing each other at a distance no greater than 1.5 feet (about 0.5 meter). Avoid moving the infrared ports away from each other during data transmission.

  • Page 60: Infrared Configuration Guidelines

    Infrared Configuration Guidelines The infrared port default settings are as follows: Port—COM3 Address—1487-147F Interrupt request (IRQ)—9 If you use Direct Cable Connection and the utility prompts you to choose a port for the infrared connection, you can select Serial Cable on COM5 or, if the computer is running a preinstalled Windows 98, Windows Me, or Windows 2000 Professional operating system, select Parallel Cable on LPT3.

  • Page 61: Connecting Usb Equipment

    External Device Connections Connecting USB Equipment USB (Universal Serial Bus) is a hardware interface that can be used to connect such low-speed external devices as a USB keyboard, mouse, drive, printer, scanner, or hub to the computer. USB hubs connect to a USB port on the computer and then to other USB devices.
  • Page 62 Modem models will need an RJ-11 cable. To connect the cable: 1. Plug one end of the RJ-11 cable into the RJ-11 jack on the computer. If the RJ-11 cable contains a noise suppression circuit, which prevents interference with TV and radio reception, orient the cable so that the noise suppression circuitry is closest to the computer.

  • Page 63: Using The Security Slot

    External Device Connections Using the Security Slot The security slot on the computer allows you to physically secure the computer. To use the security slot: 1. Loop the cable around a secure object. 2. Insert the locking device 1 into the security slot 2. 3.

  • Page 64: Computer Upgrades And Add-Ons

    Several Armada notebook accessories, such as MultiBay options and the Armada M Series external diskette drive, are not compatible with this computer model. To order accessories, visit the Compaq Web site at http://www.compaq.com Numbers guide that came with your computer to contact a Compaq authorized dealer, reseller, or service provider.

  • Page 65: Upgrading Memory

    Settings > Control Panel > Power > Hibernation tab. In Windows 2000—Select Start > Settings > Control Panel > Compaq Power > Hibernation tab. To view the amount of free space on your hard drive, select My Computer. Right-click your hard drive, select Properties.

  • Page 66: Removing And Inserting A Memory Expansion Board

    Removing and Inserting a Memory Expansion Board Å WARNING: Failure to unplug the power cord and remove the battery pack before installing a memory expansion board can damage the equipment and expose you to the risk of electrical shock. 1. Turn the computer bottom side up and remove the screws securing the memory cover.
  • Page 67 Computer Upgrades and Add-Ons 2. To remove a memory board, pull away the plastic retention clips on each side of the memory expansion board 1. The memory expansion board tilts upward. 3. Lift the edge of the memory expansion board and slide it gently out of the memory expansion slot at a 45-degree angle 2.
  • Page 68 5. To add a memory expansion board, insert it into the empty memory expansion slot at a 45-degree angle 1. Then slide it gently into place until it is seated while tilted. Memory expansion boards supported by the computer are keyed (notched) to ensure correct positioning.

  • Page 69: Adding And Using Pc Cards

    Computer Upgrades and Add-Ons Adding and Using PC Cards A PC Card is a credit card–sized accessory designed to conform to the standard specifications of the Personal Computer Memory Card International Association (PCMCIA). The computer supports two Type II PC Cards and both 32-bit CardBus and 16-bit PC Cards.

  • Page 70: Inserting A Pc Card

    Inserting a PC Card Ä CAUTION: To prevent damage to the connectors, use minimal pressure when inserting a PC Card into a PC Card slot. 1. Hold the PC Card label side up with the connector facing the computer. 2. Gently push the card into the slot until the card is seated. Inserting a PC Card Hardware Guide Computer Upgrades and Add-Ons...

  • Page 71: Removing A Pc Card

    Computer Upgrades and Add-Ons Removing a PC Card Ä CAUTION: Failure to remove a PC Card that extends beyond the computer before transporting the computer may cause permanent damage to the PC Card connectors. In Windows 98, Windows Me, and Windows 2000 Professional, follow these steps: 1.

  • Page 72: Installing Additional Device Drivers

    Installing Additional Device Drivers Device drivers are programs or data files containing information needed to run a particular PC Card. Compaq preinstalls most of the device drivers you need on the computer. To save available memory, some device drivers are not turned on.

  • Page 73: Media Bay Devices

    Depending on your computer model, the primary hard drive can be upgraded to a larger capacity. Contact your authorized Compaq dealer for optional hard drives available for your computer. Refer to the “Drives” section in this guide for instructions on removing and inserting the hard drive.

  • Page 74: Specifications

    This computer has been tested and found to comply with the limits for a Class B digital device. Refer to the Regulatory and Safety Notices guide on the Notebook Products Reference Library CD for governmental agency information. Regulatory Agency Series Numbers Regulatory agencies worldwide use agency series numbers for product identification.

  • Page 75: Computer Dimensions

    Specifications Computer Dimensions Dimensions Height Width Depth Operating Environment Factor Temperature Operating Nonoperating Relative humidity (noncondensing) Operating Nonoperating Maximum altitude (unpressurized) Operating Nonoperating 9–2 U.S. 1.31 in 12.16 in 9.76 in U.S. 50° to 95°F –4° to 140°F 10 to 90% 5 to 95% 10,000 ft 30,000 ft...

  • Page 76: Rated Input Power

    Rated Input Power Input Power Operating voltage Operating current Operating frequency range When powered by a DC source This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding 240 Vrms. Port and COM Port Settings Port Serial port USB connector...

  • Page 77: Communications Specifications

    Specifications Communications Communications Specifications Temperatures Operating Storage Relative Humidity (non-condensing Operating Storage Interfaces 9–4 32° to 167°F (0° to 75°C) -40° to 167°F (-40° to 75°C) -10 to 90% (-10 to 90%) -5 to 95%@102°F (-5 to 95%@ 39°C) Communications connector Telephone, central office network Network Standard RJ-11...
  • Page 78 Communications Specifications Temperatures Power Requirements Specifications Hardware Guide +3.3 volts +/-5%, +3.3 vaux +/-5%, +5 volts +/-5% Lucent Win Modem - Assy Type III, V.90 WW; refer to specifications 225641-001 Lucent Win Modem plus Intel PRO/100 P Mobile Combo Adapter - Assy, V.90 WW MDM, NIC, MPC13, refer to specification 218480-001...

  • Page 79: Computer Utilities

    Utilities that are preinstalled on the computer include: PhoenixBIOS Setup Utility—Allows you to modify or restore factory default settings and configure the system BIOS to diagnose and solve minor problems. Power Management—Allows you to reduce your computer power consumption. Security—Allows you to set or remove your power-on password.

  • Page 80: Enabling Power Savings

    Computer Utilities Enabling Power Savings The Enable Power Savings feature in Power Management controls all power management features. When set to disabled, the power menu is automatically disabled. The default setting is enabled. Timeout Settings You can set up timeout functions to power down computer components by selecting the Power Schemes tab from the power application in the operating system’s Control Panel.

  • Page 81: Hibernation

    7. Use arrow keys to select Exit from the menu bar. 8. Make sure the Exit Saving Changes is selected, then press enter 9. Select Yes to save your changes and Exit. Hardware Guide when the Compaq logo is displayed on the screen. again. enter Computer Utilities enter .
  • Page 82 To remove a password: 1. Access PSU by turning on the computer and pressing when the Compaq logo displays on the screen. 2. Enter your current password and press 3. Move to Password On Boot. Use the + or - key to select disable and press 4.
  • Page 83 3rd-party applications, installing 1–7 AC Adapter 2–11 2–14 accessories, ordering 8–1 additional standard components. See standard components, additional air intake vent 2–8 Aircraft Power Adapter 2–11 audio components adjusting volume 6–3 microphone 6–1 stereo line-in jack 6–1 stereo line-out/headphone jack 6–1 6–2 stereo speakers 6–1...
  • Page 84 Notebook Products Reference Library CD-ROM 2–15 QuickRestore kit 2–15 Certificate of Authenticity label 1–1 charging sequence of battery packs 4–1 COM port settings 9–3 Compaq utilities. See software component installation or removal 8–1 Index-2 components, additional standard. See standard components, additional computer connecting 1–3...
  • Page 85 DVD drives caring for 5–2 Media Bay 5–3 using 5–6 Easy Access Buttons 3–6 Easy Access buttons 2–3 electrostatic discharge (ESD) 5–2 8–1 embedded numeric keypad converting to standard keys 3–6 disabling 3–6 enabling 3–5 energy, conserving 8–8 external devices, connecting 7–1 external diskette drive 5–4 external monitor connector 2–10 2–11...
  • Page 86 Index PC Card slots 2–8 RJ-11 jack (internal modem models only) 2–8 security slot 2–8 USB connector(s) 2–8 vent(s) 2–8 lights, top component. See top component lights line-in jack, stereo 6–3 line-out jack, stereo 6–2 Maintenance, Shipping and Travel guide. See Notebook Products Reference Library CD-ROM 2–15 Media Bay...
  • Page 87 PC Card eject buttons 2–8 PC Card slots 2–8 2–9 PC Cards adding/using 8–6 configuring 8–6 inserting 8–7 removing 8–8 stopping 8–8 PhoenixBIOS Setup Utility (PSU) 10–1 pointing device, connecting external 7–1 port settings 9–3 power button 2–3 power cord 2–14 power light 2–1 2–2 power management 10–1...
  • Page 88 1–6 software 1–6 1–7 software device drivers 8–9 Easy Access Buttons 3–6 Enable Power Savings 10–2 Hibernation 10–3 installing Compaq utilities 1–7 installing optional applications 1–7 PhoenixBIOS Setup Utility (PSU) 10–1 power management 10–1 Power Schemes 10–2 security 10–3 Standby 10–2...
  • Page 89 TouchPad 2–4 3–1 TouchPad buttons 3–1 Troubleshooting guide. See Notebook Products Reference Library CD-ROM 2–15 upgrades computer 8–1 memory 8–2 options 8–1 USB (Universal Serial Bus) equipment, connecting 7–6 USB connector(s) 2–8 2–11 utilities. See software Hardware Guide vent(s) 2–8 volume, adjusting 6–3 warnings Windows 2000/Me/98 hotkeys...

This manual is also suitable for:

Evo n150 series

Table of Contents

Save PDF