Replacing the canister
Place the rinsing agent container (note the
colour marking) on the open wash cabinet
door or on a surface which is robust and
easy to clean.
Take the lid off the canister and remove
the suction lance. Place the suction lance
on the open wash cabinet door.
Replace the empty container with a full
one.
Push the suction lance into the opening of
the container and secure the lid. Observe
the colour coding.
Feed the suction lance into the container
until it reaches the bottom.
Wipe up any spilled process chemical
thoroughly.
Checking consumption
Check consumption regularly by checking
the fill levels in the supply containers and
replace containers in good time to avoid the
dispensing system being sucked completely
dry.
Cleaning agent and rinsing agent
35