Adjustable Plinth Panel (Depending On The Model) - Miele PFD 400 Operating Instructions Manual
Commercial dishwasher
Hide thumbs
Also See for PFD 400:
- Operating instructions manual (168 pages) ,
- Installations plan (88 pages) ,
- Operating instructions manual (128 pages)
Table of Contents
Advertisement
Adjustable plinth panel
(depending on the model)
Dishwashers with internal dispensing or act-
ive drying have an adjustable plinth panel.
Level the dishwasher.
Open the dishwasher door halfway and
loosen the two screws now visible at the
top of the plinth panel.
Pull the plinth panel upwards first and
then forwards.
Loosen the two screws on the right and
left of the plinth behind the panel.
Pull the inside of the plinth down to the
floor.
Tighten the two screws again.
Reassemble the plinth panel by following
the instructions above, but in reverse or-
der.
Removing the machine lid
If the dishwasher is fitted with a lid, it can be
removed as follows:
Remove both securing screws on the
back of the dishwasher with a screwdriver.
Open the door.
Unscrew the left and right fastening
screws with a screwdriver.
Lift the machine lid upwards to remove.
Installation
93
Advertisement
Table of Contents
