Table of Contents
Advertisement
Temperature display
In normal operation, the temperature
display shows the current average
refrigerator section temperature in-
side the refrigeration appliance.
Depending on the ambient temperature
and the temperature setting, it can take
the appliance a few hours to reach the
temperature required and for this tem-
perature to then be shown as a con-
stant temperature on the display.
Setting the temperature
Touch the temperature display on the
display.
Swipe left or right until the tempera-
ture you want is shown in the middle.
Tap the temperature you want to con-
firm.
The temperature display will then
change back to the current temperature
in the refrigeration appliance.
Possible temperature settings
- Refrigerator section: 37 to 48°F (3 to
9°C)
Adjusting the PerfectFresh Active
zone temperature
The temperature in the PerfectFresh Ac-
tive zone is automatically maintained
between 32 and 37°F (0 and 3°C).
However, if you would like it to be
warmer or colder, e.g., when storing
fish, you can adjust the temperature
slightly in increments.
Tap .
The correct temperature
Swipe left or right until is shown in
the middle.
Tap .
Swipe left or right until the setting you
want (1: lowest temperature; 9: high-
est temperature) is shown in the mid-
dle.
Tap on the setting you want to con-
firm.
The default setting for the tempera-
ture is
.
5
Under certain circumstances, a set-
ting from
to
1
4
temperatures to be reached. This can
cause food to freeze.
Check the temperature setting.
If you change the temperature set-
ting:
Check the temperature display after a
few hours. It will take this long for an
accurate reading to be given.
- Wait for approx. 6 hours if the refrig-
eration appliance is not very full.
- Wait for approx. 24 hours if the refrig-
eration appliance is full.
If, after this time, the temperature is still
too high or too low:
Adjust the temperature again.
can cause negative
43
Advertisement
Table of Contents
