Table of Contents
Advertisement
Cleaning and care
Pull off the supports from the sides of
the shelf 1.).
Pull off the stainless steel trim at the
front 2.).
Pull off the rear protective strip 3.).
After cleaning the shelf, reattach the
stainless steel trim, the protective
strip, and the supports.
Insert the shelf together with the sup-
port into the refrigerator either from
above or from the side.
Push the shelf back as far as it will
go.
Insert the drawer from above into the
upper or lower guide in the holder as
required.
70
Removing the drawers from the re-
frigerator section
Pull the drawer out as far as it will go.
Holding the sides of the drawer at the
back, lift it up and then forward and
out.
Push the telescopic runners back in
again to avoid damaging them.
Risk of damage as a result of in-
correct cleaning.
The telescopic runners contain a
special lubricant which can be
washed out during cleaning, damag-
ing the rails.
Wipe the telescopic runners with a
damp cloth to clean them.
Replacing the drawers
Place the drawer on the fully re-
tracted telescopic runners.
Push the drawer into the refrigeration
appliance until it clicks into position.
Advertisement
Table of Contents
