Power Button Board - HP ZBook Studio G5 Maintenance And Service Manual
Mobile workstation
Hide thumbs
Also See for ZBook Studio G5:
- User manual (34 pages) ,
- Maintenance and service manual (24 pages)
Table of Contents
Advertisement
Power button board
Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
6.
Remove the system board (see
Remove the power button board:
1.
Remove the three Phillips M2.5×4.5 screws (1) from the right hinge.
2.
Rotate the hinge upward (2).
3.
Lift the Mylar from on top of the board (1).
4.
Remove the two Phillips M2.0×3.0 screws (2) that secure the board to the computer.
64
Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
Battery on page
35).
System board on page
33).
59).
Spare part number
L28661-001
Advertisement
Table of Contents
Troubleshooting
