Nfc Module - HP ZBook Studio G5 Maintenance And Service Manual
Mobile workstation
Hide thumbs
Also See for ZBook Studio G5:
- User manual (34 pages) ,
- Maintenance and service manual (24 pages)
Table of Contents
Advertisement
NFC module
Description
NFC module
NFC module cable
Before removing the NFC module, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
Remove the NFC module:
1.
Disconnect the system board cable (1) and the NFC antenna cable (2) from the ZIF connectors on the NFC
module.
2.
Use a plastic non-conductive tool to release the NFC module from the adhesive securing it to the
computer (3), and then remove the module from the computer.
Reverse the removal procedures to install the NFC module.
52
Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
Battery on page
35).
33).
Spare part number
L33682-001
L28668-001 (Cable Kit)
Advertisement
Table of Contents
Troubleshooting
