Ac Adapter Issue; Battery Not Recognized, Not Charging - HP ZBook Studio G5 Maintenance And Service Manual
Mobile workstation
Hide thumbs
Also See for ZBook Studio G5:
- User manual (34 pages) ,
- Maintenance and service manual (24 pages)
Table of Contents
Advertisement
AC adapter issue
Symptoms
●
No sign of power
No boot
●
●
No rear power light
●
No front power light
●
Battery does not charge when AC
adapter is connected
Tips and tricks
Battery not recognized, not charging
Items
Symptoms
No battery status light
●
●
Blinking amber (critically low
battery level)
●
No boot without AC adapter
98
Chapter 6 Troubleshooting guide
Solution
Possible causes
AC adapter and others (i.e., external power source)
Troubleshooting steps
Quick check
1.
Verify external power source
2.
Remove all external devices, including docking station.
3.
Perform a hard reset for the computer
4.
Disconnect and reassemble the power cord and adapter in case the adapter
experienced short circuit, over current, over temperature events.
5.
Use a verified working adapter. If the computer operates normally, there is a
problem with the original adapter.
6.
Verify that the AC adapter works on a verified working computer. If the computer
operates normally, there is no problem with the adapter. See
warning message on page 112
Verify AC adapter
1.
Remove working battery.
2.
Verify that AC adapter is compatible with product. Verify that part number is for
this computer if possible.
3.
Inspect AC adapter and power cord for physical damage, bent middle ID pin.
4.
Plug in AC adapter and power the computer without battery.
5.
Inspect the power port on computer side for any damage, dust, debris.
6.
Check power light
(7. Status lights, blinking light codes, troubleshooting lights,
and POST error messages on page
power to the computer is good.
7.
If there is still no rear power light or no boot, replace the AC adapter.
The HP Smart AC adapter has a special pin in the middle, called the ID pin, for power
rating and throttling purpose. If this pin is broken, the rear power light will be on but
the power button and front power lights will blink continuously and the computer will
not turn on. Third party AC adapter will not work on the computer.
Use the AC adapter that came with the computer for better performance.
Procedures
Possible causes
Defective AC adapter and/or battery.
NOTE:
Before proceeding, verify that the computer can boot to BIOS or Windows with a
good AC adapter.
Troubleshooting steps
(2. Examine the environment on page
(8. Hard reset on page
for further information.
87). Rear power light indicates that external
81).
89).
HP Smart Adapter
Advertisement
Table of Contents
Troubleshooting
