Table of Contents
Advertisement
Information on Sabbath mode
This product is certified by Star-K, an
international institute for kosher
certification.
You can find the Star-K certification
version here.
Automatic door opening
(ActiveDoor)
A
The following settings can be
configured:
1. Activate and configure ActiveDoor
when commissioning the refrigeration
appliance or at a later point
2. Deactivate ActiveDoor
3. Activate ActiveDoor if the function
has already been configured and
deactivated
4. Change the set door opening angle
1. Activate and configure ActiveDoor
for the first time
Activation and configuration consist of
multiple steps:
Activating ActiveDoor
Tap .
Swipe left or right until
the middle.
Tap
.
A
will light up yellow in the display.
Tap OK.
will light up yellow in the display.
You now need to set the door opening
angle.
Setting the door opening angle
Leave the area of the door opening
range clear.
Open the door to the required door
Tip: To ensure the drawers can be
pulled out without any problems, select
a door opening angle of at least 90°.
Tap OK.
will light up yellow in the display.
Tap OK.
- If appears in the display, the door
- If appears in the display, the door
Performing a reference run
is shown in
A
Selecting further settings
opening angle (at least 70°).
opening angle was not successfully
saved.
Tap to confirm the information.
will light up yellow in the display.
Start again from the " Setting the
door opening angle" step.
opening angle has been saved
successfully.
Tap to confirm the information.
will light up yellow in the display.
You now need to perform a reference
run.
Risk of injury during automatic
opening and closing of the appliance
door
Body parts such as fingers can
become jammed in the area of the
door opening range and in the door
hinge area.
Leave the area of the door opening
range clear.
Do not reach into the door hinge area
or inside the refrigeration appliance
with your hand while the door is
closing.
Do not block the door.
41
Advertisement
Table of Contents
