Open the door to the required door
opening angle (at least 70°).
Tip: To ensure the drawers can be
pulled out without any problems, select
a door opening angle of at least 90°.
Tap OK.
will light up yellow in the display.
Tap OK.
- If appears in the display, the door
opening angle was not successfully
saved.
Tap to confirm the information.
will light up yellow in the display.
Start again from the " Setting the
door opening angle" step.
- If appears in the display, the door
opening angle has been saved
successfully.
Tap to confirm the information.
will light up yellow in the display.
You now need to perform a reference
run.
Performing a reference run
Risk of injury during automatic
opening and closing of the appliance
door
Body parts such as fingers can
become jammed in the area of the
door opening range and in the door
hinge area.
Leave the area of the door opening
range clear.
Do not reach into the door hinge area
or inside the refrigeration appliance
with your hand while the door is
closing.
Do not block the door.
Selecting further settings
Risk of damage while the
appliance door is closing
automatically
Drawers or telescopic runners that
are pulled out can be damaged
(depending on the model).
Push in drawers fully.
Push in telescopic runners fully after
removing a drawer.
Tap OK.
The reference run will start. During the
reference run, the door will close and
open again automatically once.
At the same time,
display and a buzzer will sound.
- If
appears in the display, the
reference run was not successful.
Tap
to confirm the information.
will light up yellow in the display.
A
Start again from the " Activating
ActiveDoor" step.
- If
appears in the display, the
reference run was successful.
Tap
to confirm the information.
will light up yellow in the display.
You now need to save the selected
door opening angle.
Saving the selected door opening
angle
Tap OK.
If appears in the display, the door
opening angle has been saved
successfully.
Tap to confirm the information.
will light up orange in the display.
ActiveDoor is activated.
will flash in the
A
43