Table of Contents
Advertisement
Cleaning and care
Clean the ice cube tray:
- Before switching off the ice cube
maker for a long period of time.
- Regularly, to remove ice and water
residues.
Selecting the cleaning position for
the ice cube tray
Before selecting the cleaning position
for the ice cube tray, check the
following:
- The ice cube maker is switched on.
- The ice cube drawer is empty and in
position.
Tap .
Swipe left or right until is shown in
the middle.
Tap .
It will take some time to move the ice
cube tray into the cleaning position.
Once the ice cube tray has stopped
moving, the symbol will appear on
the display.
To leave this Settings level, tap .
Remove the ice cube drawer.
70
Clean the ice cube tray and the ice
cube drawer with lukewarm water and
a little washing-up liquid. Wipe
thoroughly with clean water and dry
with a cloth.
Insert the ice cube drawer back into
the appliance.
After cleaning, tap .
You will hear the ice cube tray return to
its original position.
Cleaning the door seal
Risk of damage as a result of
incorrect cleaning.
If you treat the door seal with oils or
grease, it can become porous.
Do not use any oils or grease on the
door seal.
The door seal should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
Cleaning the ventilation gaps
A build-up of dust will increase the
energy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele vacuum cleaner dusting
brush, for example).
After cleaning
Replace all shelves and accessories in
the refrigeration appliance.
Switch the refrigeration appliance
back on, if necessary.
If you have activated the refrigerator
section's Cleaning mode :
Tap on the start display.
Tap again.
Advertisement
Table of Contents
