Table of Contents
Advertisement
Message
lights up red in the
freezer section temper-
ature display and an
alarm also sounds.
Cause and remedy
The temperature alarm has been activated; the
temperature in the freezer section has risen higher or
fallen lower than the temperature set.
Possible reasons for this include:
– The appliance door has been opened too
frequently.
– A large quantity of fresh food has been placed in
the freezer without switching on the
SuperFreeze function.
– A prolonged power cut (mains outage) has
occurred.
– The refrigeration appliance has a fault.
Tap
.
The alarm message is confirmed:
alarm stops.
The warmest temperature recorded in the freezer
section will flash for about 1 minute in the display.
Then the temperature display will change to the
current temperature in the freezer section.
You can exit from the flashing temperature display
early:
Touch the temperature display for the freezer
section.
The warmest temperature displayed will disappear.
The display will then revert to showing the current
temperature in the freezer.
Rectify the cause of the alarm.
Depending on the temperature displayed, you
should check whether food in the freezer has started
to thaw or has defrosted. If it has, it should be used
as soon as possible. Defrosted food may only be re-
frozen after it has been cooked.
Problem solving guide
goes out and the
77
Advertisement
Table of Contents
