Cleaning The Oven Compartment With Self Clean (Clean) - Miele HR 1421-3 E Operating Instructions Manual
30 inch electric range electric oven and electric cooktop
Hide thumbs
Also See for HR 1421-3 E:
- Installation instructions manual (124 pages) ,
- Operating instructions manual (84 pages)
Table of Contents
Advertisement
Cleaning and care of the oven
Cleaning the oven compartment
with Self clean (Clean)
Instead of cleaning the oven manually
you can use the Self clean (Clean)
operating mode.
During the Self Clean function, the oven
compartment reaches temperatures in
excess of 750°F (400°C). Any grime
that has accumulated will be broken
down and burnt to ash as a result of the
high temperatures.
There are 3 Self Clean settings avail-
able, each with a different duration:
- level 1 for light soiling
- level 2 for heavier soiling
- level 3 for very heavy soiling
The oven door is automatically locked
when the Self Clean process starts. It
cannot be opened until after the pro-
gram has finished.
The timer can be used to delay the start
time of the Self Clean program.
At the end of the Self Clean program,
any residues such as ash from the
cleaning process, which are formed de-
pending on the oven compartment's de-
gree of soiling, can be easily wiped
away.
Preparing for Self Clean
Accessories that are not suitable for
the Self Clean program will be dam-
aged by the high temperatures.
Remove all accessories that are not
suitable for the Self Clean program
from the oven compartment before
starting the Self Clean process. This
also applies for optional accessories
that are not suitable for the Self
Clean program.
58
The following accessories are suitable
for the Self Clean program and can be
left in the oven compartment during the
process:
– Side runners
– FlexiClips with Wire Rack
HFCBBR 30-3
– Wire rack HBBR 30-2
Remove all accessories that are not
suitable for the Self Clean program
from the oven.
Slide the wire rack into the top shelf
level.
Coarse soiling in the oven compart-
ment can cause thick smoke to de-
velop.
Burnt-on residues can cause lasting
discoloration or matte spots on
enameled surfaces.
Before starting the Self Clean pro-
gram, remove coarse soiling from the
oven compartment and scrape any
burnt-on residues off enameled sur-
faces with a glass scraper.
Advertisement
Table of Contents
