Table of Contents
Advertisement
Installation
Water drainage
The suds are drained through a drain
pump with a 1 m delivery head. For the
water to drain freely, the hose must be
free of kinks. The elbow piece supplied
hooks onto the end of the hose. If re-
quired, the hose can be extended to a
length of up to 5 m. Accessories are
available from Miele or from your Miele
dealer.
For a delivery head of more than 1 m (up
to a max. of 1.8 m) a replacement drain
pump will need to be fitted. Please con-
tact Miele for advice. With a delivery
head in excess of 1 m the hose can be
extended to a maximum of 2.5 m. Ac-
cessories are available from Miele or
from your Miele dealer.
Drainage options:
1. Directed into a sink or basin:
Please note:
– Hook the hose over the edge and
secure it.
– If the water is pumped into a
washbasin, make sure that it can
drain away freely. Otherwise there
is a risk of water overflowing or of
some of the drained water being
sucked back into the machine.
2. Connected securely to a plastic drain
pipe with a rubber nipple (there is no
need to use a siphon).
3. Connected securely to a floor drain
(gully).
4. Connected securely to a washbasin
with a plastic nipple.
74
Connected securely to a washbasin
a Adapter
b Spigot nut
c Hose clip
d End of the hose
Fit adapter to the sink drain outlet
using nut .
Attach the end of hose to adapter
.
Use a screwdriver to tighten hose clip
up close to the nut.
Advertisement
Table of Contents
