hit counter code

Cleaning The Electrobrush/Handheld Brush (Depending On The Model); Removing The Roller Brush From The Electrobrush; Removing The Roller Brush From The Handheld Brush (Depending On The Model) - Miele Duoflex HX1 Total Care Operating Instructions Manual

Cordless stick vacuum cleaner
Table of Contents

Advertisement

en-US
 Reinsert the cleaned fine dust filter
into the PowerUnit, making sure it
clicks into position.
To continue achieving the best possi-
ble cleaning results, replace the fine
dust filter (HX-FDF 20) with a new one
after approx. 3 years.
Cleaning the electrobrush/handheld
brush (depending on the model)
(Fig. 39)
 Disconnect the electrobrush/hand-
held brush from the vacuum cleaner
(Fig. 05).
 Place the electrobrush/handheld
brush upside down on a level, clean
surface.
 Use a pair of scissors to cut any
threads or hairs that have wound
themselves around the roller brush. To
guide the scissors, there are two
guide tracks on the roller brush
(Fig. 39).
Then run the vacuum cleaner to vacuum
up the cut threads and hairs.
If the small running wheels are very
heavily soiled or blocked, you can re-
move them for easier cleaning (not
possible in the case of the handheld
brush). To remove them, use a flat-
head screwdriver.
Removing the roller brush from the
electrobrush (Fig. 40)
You can take the roller brush out of the
electrobrush in order to remove stub-
born soiling and clean the inside of the
electrobrush.
A Turn the arrow on the handle on the
side of the electrobrush to the
 symbol.
24
The roller brush is released.
B Remove the roller brush.
 Clean the roller brush and remove any
stubborn dirt inside the electrobrush.
If there is heavy soiling between the
handle and the roller brush, you can re-
lease the handle.
C Pull lightly on the handle until it is re-
leased.
 Remove the soiling.
 Lock the cleaned handle back into the
roller brush.
 Push the roller brush as far as it will
go into the electrobrush until it is in
position.
 Lock the roller brush.
Removing the roller brush from the
handheld brush (depending on the
model) (Fig. 41)
You can take the roller brush out of the
handheld brush in order to remove stub-
born soiling and clean the inside of the
handheld brush.
A Release the roller brush using a coin.
B Remove the roller brush.
 Clean the roller brush and remove any
stubborn dirt inside the handheld
brush.
 Reassemble the handheld brush in re-
verse order.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Duoflex hx1 extraDuoflex hx1Hs23

Table of Contents