Cleaning agent and rinsing agent
Replacing the canister
Place the liquid cleaning agent container
(note the colour marking) on the open
wash cabinet door or on a surface which is
robust and easy to clean.
Take the lid off the canister and remove
the suction lance. Place the suction lance
on the open wash cabinet door.
Replace the empty container with a full
one.
Push the suction lance into the opening of
the container and secure the lid. Observe
the colour coding.
Feed the suction lance into the container
until it reaches the bottom.
If you use a long suction lance in a 5 litre
canister, or the 10 litre canister is only half
full, the following prompt appears in the
display:
Select canister volume
5l
Select the canister size.
Wipe up any spilled process chemical
thoroughly.
Checking consumption
Check consumption regularly by checking
the fill levels in the supply containers and
replace containers in good time to avoid the
dispensing system being sucked completely
dry.
32
Dispensing liquid cleaning agent
The dispensing concentration is set by the
Miele Customer Service Department.
10l