Rinsing Dispensing Paths - Miele PFD 401 DOS Operating Instructions Manual
Commercial dishwasher
Hide thumbs
Also See for PFD 401 DOS:
- Operating instructions manual (168 pages) ,
- Operating instructions manual (100 pages) ,
- Operating instructions manual (128 pages)
Table of Contents
Advertisement
Cleaning ag.
canister
Fill disp. paths
Rinse aid
canister
-
Clean. agent canister
Fill the cleaning agent dispensing system.
-
Rinse aid canister
Fill the rinsing agent dispensing system.
Select the dispensing system that you
want to fill.
You will then be asked if you want to start
the filling process, e.g.:
Start filling dispensing paths?
No
Select
to start the process.
Yes
The dispensing system is filled
automatically. The message
is displayed following
paths completed
successful completion. If filling is
interrupted prematurely, the process must
be repeated.
Cancel the process at this point by
selecting
.
No
Rinsing dispensing paths
A dispensing system must be rinsed in the
following situations:
- If a dispensing system was accidentally
filled with the wrong medium.
- If deposits have formed in the dispensing
paths or in the containers, which could
completely or partially clog the systems.
Deposits can form, for example, after long
periods of downtime or when the
containers are refilled instead of being
replaced.
Fill a clean container, e.g. a bucket, with
clear, clean water.
Damage to the dispensing system.
Small foreign objects in the water, such as
sand, fluff or similar, can be sucked in by
the dispensing system and may clog or
damage it.
Make sure that there are no foreign
objects in the water.
Yes
Place the suction lance in the container
with the water. The lower end of the
suction lance with the suction opening
must be thoroughly rinsed.
Fill dispensing
Secure the suction lance so that it cannot
tip over or fall out of the container.
Machine functions
47
Advertisement
Table of Contents
