Increased Water Level; Interim Rinse; Resetting Parameters - Miele PFD 401 DOS Operating Instructions Manual
Commercial dishwasher
Hide thumbs
Also See for PFD 401 DOS:
- Operating instructions manual (168 pages) ,
- Operating instructions manual (100 pages) ,
- Operating instructions manual (128 pages)
Table of Contents
Advertisement
Further settings
Increased water level
It is then advisable to increase the water
level when a lot of water is absorbed due to
the structure of the load items or when the
type of soiling and the process chemicals
used lead to excess foam development. The
additional volume of water depends on the
type of basket or mobile unit used, the type
of soiling and the load items.
If slightly soiled load items which absorb a
little water are being reprocessed, the water
level can be reset to the factory default
setting to save water and energy.
0,5
Increas. water
quan.
-
Set the additional volume of water by
tapping the
symbol (lower) and
-
(higher). In the lowest setting, the volume
of water corresponds to the factory default
setting.
Press
to save the setting
OK
62
l
+
OK
symbol
+
Interim rinse
If required, an additional intermediate wash
block can be activated for selected
programmes.
You can find out which programmes support
this function in the "Programme chart".
On
Interim rinse
-
On
Activates the additional intermediate wash
block for the selected programme.
-
Off
Deactivates the additional intermediate
wash block.
Tap to select an option.
Resetting parameters
You can reset individual programmes to the
factory default settings. The programme
parameters and changed programme names
are reset.
Reset programme parameters?
Yes
Select
to reset the parameters and
Yes
programme names to the factory default
settings.
Select
to cancel the process.
No
Off
No
Advertisement
Table of Contents
