Table of Contents
Advertisement
Water filter
Remove the safety cap from the new
filter cartridge.
3.
4.
Loosen the cap from the sides of the
old filter cartridge 3.) and remove the
cap 4.).
Clip the cap onto the new filter
cartridge 5.).
Empty the old filter cartridge.
Tip: The old filter cartridge can be
disposed of with household waste.
Slide the new filter cartridge as far as
it will go into the filter opening 6.),
making sure the cap is vertical.
100
5.
6.
Turn the cap of the filter cartridge
clockwise until it is in the horizontal
position 7.).
Risk of damage caused by water
rushing out.
If the filter cartridge is not fitted
correctly, there is a risk of water
leaking out of the refrigeration
appliance.
When fitting the new filter cartridge,
be sure to turn it as far as the marker.
Once the IntensiveClear active charcoal
filter has been replaced, the water filter
display must be reset using Settings
mode on the display (see "Resetting
the
Water filter display
additional settings").
After inserting a new IntensiveClear
active charcoal filter, dispose of all
ice cubes produced in the next
24 hours following the change.
7.
" in "Selecting
Advertisement
Table of Contents
