Table of Contents
Advertisement
Cleaning and care
Rinse the filter under running
lukewarm water. Turn the filter over
under the running water to clean it on
all sides.
Reinsert the filter into the back of the
filter cartridge 4.).
96
Slide the filter cartridge as far as it will
go into the filter opening 5.), making
sure the cap is vertical.
4.
Turn the cap of the filter cartridge
clockwise until it is in the horizontal
position 6.).
rushing out.
If the filter cartridge is not fitted
correctly, there is a risk of water
leaking out of the refrigeration
appliance.
When fitting the filter cartridge, be
sure to turn it as far as the marker.
Once the IntensiveClear mesh filter has
been cleaned, the water filter display
must be reset using Settings mode
on the display (see "Resetting the
filter display
settings").
Risk of damage caused by water
" in "Selecting additional
5.
6.
Water
Advertisement
Table of Contents
