Table of Contents
Advertisement
Problem solving guide
Message
F Please call Miele Service
appears on the display
and an alarm sounds.
The symbol lights up in
the display. The refriger-
ation appliance does not
get cold, although the
appliance controls are
working.
Problems with the ice cube maker
Problem
The ice maker is not pro-
ducing any ice cubes.
106
Cause and remedy
There is a fault.
Make a note of the error message if necessary.
Call the Miele Customer Service Department.
To turn the alarm off, touch the symbol.
The error message will not disappear from the display
until the error has been rectified.
The voltage level is too high/low.
Observe the connection data under "Installation –
Electrical connection".
Contact the Miele Customer Service Department if
necessary.
To turn the alarm off, touch the symbol.
The error message will not disappear from the display
until the error has been rectified.
The
is switched on. Demo mode allows
Demo mode
the refrigeration appliance to be presented in the
showroom without the cooling system being switched
on. This setting is not needed for domestic use.
Switch off Demo mode (see "Selecting additional
settings – Switching
Cause and remedy
The refrigeration appliance and the ice maker are not
switched on.
Switch the refrigeration appliance and the ice maker
on.
Check whether the water filter is inserted correctly.
The mains water connection has not been installed.
Make sure that the mains water connection has
been installed correctly.
The water supply is not open or has not been vented.
Open the water supply.
Check whether the water supply has been vented.
There is a kink in the water hose.
Check the water hose and replace it if necessary.
The temperature in the freezer zone is too high.
off").
Demo mode
Advertisement
Table of Contents
