Removing A Second Hard Disk Drive - Compaq 315eu - Microtower PC Upgrade And Service Manual

Upgrading and servicing guide

Hide thumbs Also See for 315eu - Microtower PC:

Table of Contents

Upgrading and Servicing Guide

Align the new hard disk drive with the four screw holes on the front of the chassis, and

then attach the four screws that secure the hard disk drive to the chassis. Make sure

the data and power cables of the hard disk drive are facing the closed side panel and

not towards the open side panel of the chassis.

NOTE: If you are replacing an old drive with a new drive, remove the four guide

screws from the old drive, and use them to install the new drive.

If you are installing a second hard disk drive, use four standard 6-32 screws that you

purchase separately.

Replace the front and side panels, and then close the computer. See "Opening and

Closing the Computer" on page 1.

Removing a Second Hard Disk Drive

Prepare the computer to be opened, and then remove the side and front panels. See

"Opening and Closing the Computer" on page 1.

Remove the four screws that secure the second hard disk drive to the chassis.

Table of Contents

Show Quick Links

Table of Contents

Presario sg3200 - desktop pc Sg3-100 - desktop pc Sg3-300