Download Print this page

Configuring The Second Node - Compaq 230050-001 - StorageWorks NAS B3000 Model N900 Server Installation Manual

Installation guide for the b3000 v1 - technical white paper

Hide thumbs Also See for 230050-001 - StorageWorks NAS B3000 Model N900 Server:

Table of Contents

[Enter your Document Title]

Figure 13. Cluster Administrator

If your snap-in window is similar to that shown above in Figure 13, your

Cluster service was successfully installed on the first node. It is now possible to

install the Cluster service on the second node.

Configuring the Second Node

Note: For this section, leave the first node on and power up the second node.

Installing Cluster service on the second node requires less time than on the first

node. Setup configures the Cluster service network settings on the second node

based on the configuration of the first node.

Installation of Cluster service on the second node begins exactly as for the first

node. During installation of the second node, the first node must be running.

Follow the same procedures used for installing Cluster service on the first node,

with the following differences:

In the Create or Join a Cluster dialog box, select The second or next node in

the cluster, and click Next.

Enter the cluster name that was previously created (in this example, MyCluster), and

click Next.

Leave Connect to cluster as unchecked. The Cluster Service Configuration

Wizard will automatically supply the name of the user account selected during the

installation of the first node. Always use the same account used when setting up the first

cluster node.

[Document Restriction Notice]

Table of Contents