Verifying Fca Installation; Verifying Device Recognition - HP StorageWorks XP10000 - Disk Array Configuration Manual
Storageworks xp disk array configuration guide for hp-ux
Hide thumbs
Also See for StorageWorks XP10000 - Disk Array:
- User manual (92 pages) ,
- Owner's manual (92 pages) ,
- Site preparation manual (80 pages)
Table of Contents
Advertisement
In XP Command View Advanced Edition Software, LUN mapping includes:
Configuring ports
Creating storage groups
Mapping volumes and WWN/host access permissions to the storage groups
For details see the HP StorageWorks XP LUN Manager User s Guide or the HP StorageWorks XP
Command View Advanced Edition Software Device Manager Web Client User s Guide. Note the
LUNs and their ports, WWNs, nicknames, and LDEVs for later use in verifying host and device
configuration.
Verifying FCA installation
After configuring the ports on the disk array, verify that the FCAs are installed properly.
Use the ioscan
rows are not displayed, check the host adapter installation (hardware and driver installation) or the
host configuration.
Example
# ioscan
f
Class
I H/W Path
...
fc
0 8/12
lan
1 8/12.5
fcp
0 8/12.8
ext bus
2 8/12.8.0.255.0
Verifying device recognition
Verify that the HP-UX system recognizes the new devices on the disk array.
If the SCSI paths were defined after the system is powered on, you must halt and restart the system
to allow the system to recognize the new devices.
f command, and verify that the rows shown in the example are displayed. If these
Driver
fcT1
fcT1_cntl CLAIMED
fcp
fcpdev
S/W State H/W Type
CLAIMED
INTERFACE HP Fibre ...
INTERFACE HP Fibre ...
CLAIMED
INTERFACE FCP Proto...
CLAIMED
INTERFACE FCP Devic...
XP Disk Array Configuration Guide for HP-UX
Description
15
Advertisement
Table of Contents
