hit counter code

Ventilation Gaps - Miele KT 3414 S Operating And Installation Manual

Table of Contents

Advertisement

Never use cleaning agents
containing abrasive substances
such as sand, soda, acids or
chemical solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
Make sure that water cannot get into
the electronic unit, into the light or
into the ventilation gaps.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Never use steam cleaning
apparatus to defrost or clean the
appliance. Steam could reach the
electrical components and cause a
short circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is required
in the event of a service call.
^ Switch the appliance off by turning the
temperature selector to "0" and then
by switching it off at the socket and
removing the plug.
^ Take any food out of the appliance
and store it in a cool place.
^ Defrost the freezer section.
^ Take out any removable parts, e.g.
shelves, for cleaning.
24
^ The stainless steel trim can be pulled
off the front edge of shelves if you
wish to clean the shelves without
taking them out of the fridge.
Clean using lukewarm water with a little
washing-up liquid.
^ Clean the refrigerator section at least
once a month and the freezer section
each time it is defrosted.
^ Accessories and shelves should all
be hand-washed. The butter dish is,
however, dishwasher safe.
^ Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
^ After cleaning, wipe the outer casing,
the interior and accessories with a
damp cloth and dry with a soft cloth.
Leave the doors open to air the
appliance for a short while.
^ A microfibre E-Cloth is available from
the Miele UK Spare Parts Department
which is suitable for cleaning
surfaces such as stainless steel,
glass, plastic and chrome without the
use of chemicals. It can be washed
300 times.
^ The ventilation gaps should be
cleaned regularly with a brush or
vacuum cleaner. A build-up of dust
will increase the energy consumption
of the appliance.

Advertisement

Table of Contents
loading

Table of Contents