hit counter code

Switching On And Off - Miele KFN 9755 iDE Operating And Installation Instructions

Frost free fridge-freezer with ice cube maker and dynamiccooling
Table of Contents

Advertisement

Switching on and off

Before using for the first time
Protective foil
The stainless steel strips and frames
have a layer of protective foil to prevent
scratching during transportation.
^ Carefully remove the protective foil
from the stainless steel strips.
Cleaning and care
^ Immediately after removing the
protective foil, apply the Original
Miele Care product for stainless steel
that comes with the appliance.
Important! This stainless steel
cleaner gives long lasting protection
and helps to prevent resoiling.
^ Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
14
Switching the appliance on
The refrigerator and freezer sections are
switched on together by pressing the
master switch on the right-hand side of
the control panel. This is also possible
via the On/Off button on the left-hand
side.
^ Press the master switch on the
right-hand side of the control panel.
The temperature display for the
refrigerator section lights up, and the
interior lighting comes on when the door
is opened.
Bars light up in the temperature display
for the freezer section until it reaches the
set temperature.
The appliance starts cooling.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
Cool pack
Place the cool pack in the top freezer
drawer or, to save space, on the freezer
tray. The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
Switching off
^ Press the master switch on the
right-hand side of the control panel
until both temperature displays go
out.

Advertisement

Table of Contents
loading

Table of Contents