Miele KFN 9755 iDE Operating And Installation Instructions page 42
Frost free fridge-freezer with ice cube maker and dynamiccooling
Hide thumbs
Also See for KFN 9755 iDE:
- Operating and installation instructions (68 pages) ,
- Operating and installation instructions (25 pages) ,
- Operating and installation instructions (60 pages)
Table of Contents
Advertisement
Problem solving guide
. . . "nA" appears in the freezer
section temperature display.
The temperature has risen too high at
some point during the last couple of
days because of a power cut.
^ Touch the alarm off sensor whilst "nA"
is lit up in the display.
The alarm will stop and the
temperature display will show the
warmest temperature recorded in the
freezer section during the power cut.
Check the condition of the food in the
freezer. If it has defrosted or started to
defrost, check that it is still safe to use
and, if so, use it as soon as possible.
Defrosted food may only be refrozen
after it has been cooked.
The warmest temperature will be
displayed for about 1 minute. The
display will then revert to showing the
current temperature in the freezer.
At the end of a power cut, the
appliance will start operating again at
the last temperature setting selected.
. . . you cannot switch the ice cube
maker on.
^ Check whether the appliance is
connected to the electricity supply.
. . . the ice cube maker is not
producing any ice cubes.
^ Was the water inlet pipe purged of air
by a qualified and competent person
before the appliance was used for
the first time?
^ Check whether the ice cube maker is
switched on.
42
^ Check whether the freezer section is
switched on.
^ Check whether the water inlet is
open.
^ Check that the ice cube drawer has
been closed properly.
Remember it can take up to 24 hours to
produce the first ice cubes.
. . . the indicator light on the ice cube
maker is flashing.
There is a fault. Call Miele.
. . . the interior lighting in the
refrigerator section is not working.
Has the refrigerator door been left open
for too long? To avoid overheating, the
lighting switches itself off automatically
after approx. 15 minutes if the door is
left open.
If it does not come on when the door is
opened briefly, but the temperature
display does, then the lighting is
defective.
^ Call Miele.
The LED lighting may only be repaired
or changed by a Miele service
technician because there are live parts
under the cover. Danger of injury and
damage!
Hide quick links:
Advertisement
Table of Contents
