Miele F 9052 i Operating And Installation Instructions
Hide thumbs
Also See for F 9052 i:
- Operating and installation manual (48 pages) ,
- Operating and installation instruction (52 pages) ,
- Operating and installation instructions (48 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Miele F 9052 i
Summary of Contents for Miele F 9052 i
- Page 1 Operating and installation instructions Freezer F 9052 i (-1) F 9252 i (-1) F 9552 i (-1) en - AU, NZ To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time.
-
Page 2: Table Of Contents
Contents Guide to the appliance ..........4 Caring for the environment . - Page 3 Contents Cleaning ............26 Cleaning the interior and accessories .
-
Page 4: Guide To The Appliance
Guide to the appliance a Safety lock indicator light d Temperature selector buttons (+ for warmer; – for colder) b On/Off button e SuperFreeze button and indicator c Temperature display light f Alarm off button a Freezer drawers with freezer calendar... -
Page 5: Caring For The Environment
Caring for the environment Disposal of the packing Disposing of your old material appliance The transport and protective packing Electrical and electronic appliances has been selected from materials which often contain materials which, if are environmentally friendly for disposal handled or disposed of incorrectly, and can normally be recycled. -
Page 6: Warning And Safety Instructions
Warning and Safety instructions Any other usage is at the owner's risk This appliance complies with all and could be dangerous. The relevant local and national safety manufacturer cannot be held liable for requirements. Improper use of the damage resulting from incorrect or appliance can, however, present a improper use or operation. -
Page 7: Technical Safety
Warning and Safety instructions Technical safety – call Miele. Before installation, check the The more coolant there is in an appliance for visible signs of damage. appliance, the larger the room it should Do not install and use a damaged be installed in. - Page 8 The manufacturer cannot be held liable for the consequences of an inadequate Faulty components must only be earthing system (e.g. electric shock). replaced by genuine Miele original spare parts. The manufacturer can only Installation, maintenance and repairs may only be carried out by a...
- Page 9 Warning and Safety instructions Correct use Do not store cans or bottles containing carbonated drinks or liquids Never handle frozen food with wet which could freeze in the freezer. The hands. Your hands may freeze to the cans or bottles could explode. frozen food.
- Page 10 Warning and Safety instructions Disposing of your old The appliance is designed for use within certain climate ranges (ambient appliance temperatures), and should not be used Before disposing of an old outside this range. The climate range appliance, first make the door latches for your appliance is stated on the data or locks unusable.
-
Page 11: How To Save Energy
How to save energy Normal energy consumption Increased energy consumption Installation In a ventilated room. In an enclosed, unventilated room. Protected from direct sunlight. In direct sunlight. Not situated near a heat source Situated near a heat source (radiator, oven). (radiator, oven). -
Page 12: Switching On And Off
Switching on and off Before using for the first time Cool pack Place the cool pack in the top drawer Cleaning or, to save space, in the shallow freezer ^ Clean the inside of the appliance and drawer. The cool pack will be at its the accessories with lukewarm water most effective after it has been in the and a little washing-up liquid, and... -
Page 13: Safety Lock
Switching on and off Safety lock The safety lock can be activated to prevent the appliance being switched off inadvertently. ^ Press the On/Off button to come out of the setting mode. Activating or deactivating the safety lock If you do not do this, the electronics will switch over to normal operation automatically after a couple of minutes. -
Page 14: The Correct Temperature
The correct temperature Setting the temperature It is very important to set the correct temperature for storing food in the Use the two buttons underneath the appliance. Micro-organisms will cause temperature display to set the food which is not stored at the correct temperature for the freezer. -
Page 15: Temperature Range
The correct temperature If you have adjusted the temperature, This loss of coldness is no cause for wait for approx. 6 hours if the concern in the following circumstances: appliance is not very full and for – when the door has been left open for approx. - Page 16 The correct temperature ^ Press one of the temperature selector buttons repeatedly until appears in the display. ^ Press the SuperFreeze button again. lights up in the display. ^ You can now adjust the level of brightness by pressing the temperature selector buttons.
-
Page 17: Alarm
Alarm Activating the alarm system Your appliance has been fitted with a warning system which ensures that the The alarm system is always active. It temperature in the freezer cannot rise does not have to be switched on unnoticed and to avoid energy being manually. -
Page 18: Superfreeze
SuperFreeze SuperFreeze Switching off SuperFreeze Switch the SuperFreeze function on The SuperFreeze function will switch off before putting fresh food into the automatically after a minimum of 30 freezer. hours and a maximum of 65 hours. The indicator light will go out and the This helps food to freeze quickly and appliance will run at normal power retain its nutrients, vitamins, flavours... -
Page 19: Freezing And Storing Food
Freezing and storing food Maximum freezing capacity Storing frozen food To ensure that fresh food placed in the When buying frozen food to store in freezer freezes through to the core as your freezer, check quickly as possible, the maximum –... -
Page 20: Home Freezing
Freezing and storing food Home freezing lightly before freezing, but care should be taken as the taste of some Only freeze fresh food which is in a spices alters when frozen. good condition. – Do not place hot food or drinks in the Tips on home freezing freezer. -
Page 21: Before Placing Food In The Freezer
Freezing and storing food Before placing food in the freezer – Freezing the maximum quantity of food (see data plate) ^ When freezing more than 2 kg of ^ Take out the bottom freezer drawer. fresh food, switch on the SuperFreeze function for some time ^ Place the food flat on the floor of the before placing the food in the freezer... -
Page 22: Freezer Calendar
Freezing and storing food Freezer calendar Defrosting The freezer calendar on the freezer Frozen food can be defrosted in drawer gives the length of time in different ways: months which various foods can be – in a microwave oven, stored for effectively. –... -
Page 23: Making Ice Cubes
Freezing and storing food Making ice cubes Cool pack The cool pack prevents the temperature in the freezer rising too quickly in the event of a power cut. This will ensure that food can be kept for longer should a power cut occur. ^ Place the cool pack in the top freezer ^ Fill the ice cube tray with water to ¾... -
Page 24: Defrosting
Defrosting In normal use, ice and frost will form in Do not scrape ice and frost off. the freezer. The amount of ice and frost Do not use any sharp pointed object is also influenced by the following: inside the freezer. –... - Page 25 Defrosting To defrost To speed up defrosting, two bowls of hot water (not boiling), with plates Carry out the defrosting procedure underneath them, can be placed in the as quickly as possible if food has appliance. Closing the door in this not been placed in another freezer.
-
Page 26: Cleaning
Cleaning Before cleaning Do not let water get into the ^ Switch off the appliance. electronic unit or the appliance ^ Disconnect the appliance from the lighting. mains. Switch off at the wall and Do not use a steam cleaning withdraw the plug from the socket, or disconnect the mains fuse or remove apparatus to clean the appliance. -
Page 27: Ventilation Gaps
Cleaning Ventilation gaps After cleaning ^ The ventilation gaps should be ^ Close the appliance door. cleaned regularly with a brush or ^ Reconnect the appliance to the vacuum cleaner. A build-up of dust electricity supply and switch it on. will increase the energy consumption ^ Switch on the SuperFreeze function of the appliance. -
Page 28: Problem Solving Guide
Contact a qualified electrician or To save energy, the compressor runs at Miele. a lower speed, but for longer, when less cooling is required..the door will not open because it has been opened and closed too . - Page 29 . . . "F0" to "F9" appear in the freezer. temperature display. ^ Check whether the door closes There is a fault. Call Miele. properly.."nA" appears in the temperature ^ Defrost and then clean the freezer.
- Page 30 The safety lock has been activated. If you still cannot remedy the fault having followed these suggestions, please contact Miele. However, a call-out charge will be applied for unnecessary service visits where the problem could have been rectified as described in these Operating instructions.
-
Page 31: Noises
Noises Normal noises What causes them Humming noise made by the motor (compressor). This noise can Brrrrr ... get louder for brief periods when the motor is switching on. Blubb, blubb..A gurgling noise can be heard when coolant is circulating through the pipes. -
Page 32: After Sales
You will find the address and telephone number of Miele on the back cover of the manual. When contacting your Chartered Agent or Miele, please quote the model and serial number of your appliance. This information is given on the data plate inside your appliance. -
Page 33: Electrical Connection
Electrical connection Electrical connection WARNING THIS APPLIANCE MUST BE All electrical work should be carried out EARTHED by a suitably qualified and competent person in strict accordance with current For India only: Due to extreme local and national safety regulations. fluctuations in the electrical network, The appliance is supplied with a mains we recommend operating the... -
Page 34: Installation
Installation Ventilation This appliance must be built in, Air at the back of the appliance gets otherwise it could tip over. warm. The appliance housing unit must be constructed to allow sufficient space Location for ventilation. This appliance should be installed in a A ventilation gap of at least 38 mm dry, well-ventilated room. -
Page 35: Before Installation
The old door can be replaced by a stainless steel front if required. ^ Remove any cable clips from the back of the appliance. Call Miele to order a stainless steel front. ^ Remove the red transit bars a and seal the resulting holes with the caps... -
Page 36: Building-In Dimensions
Building-in dimensions Niche height [mm] F 9052 i (-1) 714 - 730 F 9252 i (-1) 874 - 890 F 9552 i (-1) 1397 - 1413... -
Page 37: Adjusting The Door Hinges
Adjusting the door hinges The door hinges are set ex-works to enable the door to be opened wide. However, if the opening angle of the door needs to be limited for any reason, the hinge can be adjusted to accommodate this. For example, if the appliance door hits an adjacent wall when opened, the opening angle can be limited to 90°. -
Page 38: Changing The Door Hinging
Changing the door hinging ^ Slide the door outwards and lift it off Before building the appliance in, you will need to decide on which side the door is to be hinged. If left hand door ^ Unscrew the fixing screws d hinging is required, follow the completely, and loosely screw them instructions below. - Page 39 Changing the door hinging ^ Unscrew mounting b and pull To secure the soft-close mechanism soft-close mechanism c downwards ^ Place the door with the outer side to remove it. downwards on a stable surface. ^ Undo ball joint d using a spanner and remove it.
- Page 40 Changing the door hinging ^ Push the appliance door onto the pre-fitted screws, and then tighten the screws. ^ Replace covers a, b and c. ^ Replace the locking pins into the top of the hinges to prevent the doors opening too far.
-
Page 41: Building In The Appliance
Appliance max. weight of the furniture door in kg F 9052 i (-1) The housing unit must be carefully aligned using a spirit level before F 9252 i (-1) installing the appliance. The unit... - Page 42 Building in the appliance Preparing the appliance ^ Open the appliance door. ^ Slide cover strip a into the holder in the middle of the appliance with the bumps facing downwards. The bumps will fit into the keyhole slots. ^ Position the mains electricity cable so ^ Remove the cover c on the top that the appliance can be connected corner of the appliance, using a...
- Page 43 Building in the appliance Building in the appliance ^ Fit the cover g onto the fixing bracket h. ^ Secure the fixing bracket h to the bottom of the appliance with the screws i (M5 x 15). ^ Carefully remove the protective foil –...
-
Page 44: Securing The Appliance In The Niche
Building in the appliance Securing the appliance in the On furniture with door fittings (e.g. bumps, seals, etc.) the dimension of niche these must be taken into account when making sure there is a gap all round of 42 mm. ^ Pull the appliance forwards by the dimension of the door fitting to keep the gap at 42 mm all round. -
Page 45: Fitting A Furniture Door
Building in the appliance ^ Break off the protruding end of the bottom cover e. It is no longer required. ^ Fit angled cover g onto the bottom fixing bracket c. ^ Close the appliance door. Fitting a furniture door ^ Loosen the screws b on the top and bottom fixing brackets c. - Page 46 Building in the appliance ^ Using a pencil, lightly mark a line ^ Hang the furniture door onto the adjusting bolts h. down the centre of the inside of the furniture door. ^ Loosely attach nuts c on the ^ Hang the fixing brackets d with the adjusting bolts.
- Page 47 Building in the appliance Securing the appliance door to the furniture door: ^ Close the door and align to match the ^ Screw the fixing bracket a with a neighbouring furniture doors. hexagonal headed screw b into the ^ Whilst counterholding the adjusting pre-drilled holes in the appliance bolts i with a screwdriver, tighten door.
- Page 48 Building in the appliance ^ Replace all the covers. To make sure the appliance is correctly fitted: – The doors must close properly. – The doors must not touch the furniture carcase. – The seal at the top edge of the handle side must fit properly.
- Page 52 Alteration rights reserved / 4911 M.-Nr. 09 290 650 / 00 F 9052 i (-1), F9252 i (-1), F 9552 i (-1)