Page 1 THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form without prior written consent from Compaq Computer Corporation. © 1998 Compaq Computer Corporation.
Page 2: Preface
Additional information is available on the Compaq Armada 7800 Family of Personal Computers Illustrated Parts Map. Information for the Compaq ArmadaStation and Armada MiniStation E and EX is available in the Compaq ArmadaStation and Armada MiniStation E and EX Maintenance and Service Guide and Illustrated Parts Map.
Page 3: Serial Number
Compaq Armada 7800 Family of Personal Computers Maintenance and Service Guide n Compaq Armada 7800 Family of Personal Computers Illustrated Parts Map n Compaq ArmadaStation and Armada MiniStation E and EX Maintenance and Service Guide n Compaq ArmadaStation and Armada MiniStation E and EX Illustrated Parts Map n Compaq Internet site at http://www.Compaq.com...
Page 4: Table Of Contents
2.1 Preliminary Steps..........................2-2 2.2 Clearing Passwords..........................2-3 2.3 Power-On Self-Test (POST)......................2-4 2.4 POST Error Messages........................2-4 2.5 Compaq Utilities ..........................2-8 Computer Setup............................ 2-8 Computer Checkup (TEST) ....................... 2-10 Running View System Information (INSPECT) ................2-17 Running Compaq Diagnostics ......................2-18 Boot Sequencing ..........................
Page 8: Product Description
Chapter 1 Product Description 1.1 Computer Features and Models The Compaq Armada 7800 Family of Personal Computers offers advanced modularity, an Intel Pentium II processor with 64-bit architecture, an industry-leading Accelerated Graphics Port (AGP) implementation, and extensive multimedia support. The computer provides desktop functionality and connectivity through the optional ArmadaStation and Armada MiniStation.
Page 9 IrDa-compliant infrared port (4-Mbps standard) for wireless file transfer, printing, and file synchronization Built-in stereo speakers providing Compaq PremierSound, microphone, and jacks for stereo audio sound with electronic equalization and wave table synthesis Energy Star-compliant power saving features Ports and connectors for external equipment, including universal serial bus (USB),...
Page 10: Models
Compaq Armada 7800 Family of Personal Computers Model Armada 7800 6266 T 5000 D M 1 (64-MB RAM standard) Armada 7800 6266 T 5000 D 0 1 (64-MB RAM standard) Armada 7800 6266 T 5000 D 0 3 (64-MB RAM standard)
Page 11: Intelligent Manageability
SNMP to integrate with PC management software providers. Configuration Management—optimizes the computer by providing the latest drivers, utilities, and software, which are available on CD-ROM and the Compaq web site at http://www.compaq.com. NOTE: For further help with Intelligent Manageability, refer to Intelligent Manageability Help.
Page 12 ........Changing the Asset Tag Number 1.
Page 13 Compaq provides support software to optimize the performance of the computer. This support software is accessible through a monthly subscription CD-ROM. Support software can also be downloaded from the Compaq web site at http://www.compaq.com. Support software includes: Locator browser—searches for the latest device drivers, utilities, ROM images, and other support software on a CD-ROM and at the Compaq web site at http://www.compaq.com.
Page 14: Computer Components
........1.2 Computer Components The following table lists the components that ship with the computer and those that are available as options.
Page 15: System Memory Options
........The computer options are described in the following sections. System Memory Options The main memory subsystem supports a minimum standard 32 megabytes of Synchronous SDRAM, expandable to 160 megabytes.
Page 16: Mass Storage Devices
........Mass Storage Devices The following mass storage devices are available for the computer.
Page 17 ........CD-ROM Drive A 20-Speed Max CD-ROM drive comes as standard equipment with the computer. This CD-ROM drive is also available as an option.
Page 18: Battery Equipment Options
........Battery Equipment Options The following battery options are available: Automobile/Aircraft Adapter Lithium ion battery pack...
Page 19: Computer External Components
........1.3 Computer External Components The external components on the display, front, and left side of the computer are shown in Figure 1-2 and described in Table 1-5.
Page 20 ........The external components on the right side of the computer are shown in Figure 1-3 and are described in Table 1-6.
Page 21: Rear Panel Components
........The external components on the rear panel of the computer are shown in Figure 1-4 and are described in Table 1-7.
Page 22 ........Table 1-7 Continued Power cord connector Connects external (AC) power.
Page 23: Keyboard Components
........Computer keyboard components are shown in Figure 1-5 and described in Table 1-8. Figure 1-5.
Page 24 ........Additional computer keyboard components are shown in Figure 1-6 and described in Table 1-9.
Page 25: Bottom Components
........The external components on the bottom of the computer are shown in Figure 1-7 and are described in Table 1-10.
Page 26: Design Overview
........1.4 Design Overview This section presents a design overview of key parts and features of the computer.
Page 27: Troubleshooting
If You Want To: Then Run: Check for POST error messages POST Check that computer components are recognized and Computer Checkup (TEST) under Compaq Utilities running properly View information about the computer and installed or View System Information (INSPECT) under connected devices...
Page 28: Preliminary Steps
Follow these steps to run Compaq Utilities: a. If you are running Compaq Utilities from the hard drive, turn on or restart the computer. Press F10 when the cursor appears in the upper-right corner of the screen.
Page 29: Clearing Passwords
........2.2 Clearing Passwords 1.
Page 30: Power-On Self-Test (Post)
........2.3 Power-On Self-Test (POST) The Power-On Self-Test (POST) is a series of tests that run every time the computer is turned on.
Page 32 ........Fatal errors emit a beep and may display a FATAL message. Fatal errors indicate severe problems, such as a hardware failure.
Page 34: Compaq Utilities
........2.5 Compaq Utilities Compaq Utilities contain several functions that Determine if various computer devices are recognized by the system and are operating properly.
Page 36: Computer Checkup (Test)
3. Turn on the external devices that you want to test. 4. Turn on or restart the computer. 5. Access Compaq Utilities by pressing F10 when the blinking cursor appears in the upper-right corner of the display. 6. Click Computer Checkup View the Device List.
Page 39 697-xx Diskette type error. 698-xx Diskette drive speed not within limits. 699-xx Diskette drive/media ID error. 1. Replace media. 2. Run Compaq Utilities. Table 2-9 Serial Test Error Codes Error Code Description Recommended Action 1101-xx Serial port test failed. 1. Check port configuration.
Page 40 1701-xx Hard drive format test failed. The following steps apply to error codes 1701-xx through 1736-xx: 1. Run Compaq Utilities and verify drive type. 2. Verify that all secondary drives have secondary 1702-xx Hard drive read test failed. drive capability.
Page 41 Video memory test failed. The following actions apply to error codes 2402-xx through 2456-xx: 2403-xx Video attribute test failed. 1. Run Compaq Utilities. 2404-xx Video character set test failed. 2. Disconnect external monitor and test with internal LCD display. 2405-xx Video 80 ×...
Page 43: Running View System Information (Inspect)
1. Connect a printer if you want to print the INSPECT information. 2. Turn on or restart the computer. 3. Access Compaq Utilities by pressing F10 when the cursor blinks in the upper-right corner of the display. 4. If prompted, select a language.
Page 44: Running Compaq Diagnostics
........Running Compaq Diagnostics Compaq Diagnostics provides computer component information when the operating system is working. If you are running Windows 95, access Compaq Diagnostics for Windows by double-clicking My Computer Control Panel Compaq Diagnostics.
Page 45 ........Table 2-17 Power Low Battery Warning Beep Checked (enabled)
Page 46: Troubleshooting Without Diagnostics
If the problem appears related to a software application, check the documentation provided with the software. You may discover something you can resolve easily by yourself. If the condition persists, contact your Compaq authorized dealer or service provider. 2-20 Troubleshooting...
Page 47: Solving Audio Problems
........Solving Audio Problems Table 2-19 Solving Audio Problems Problem...
Page 48 ........Table 2-19 Continued Problem Probable Cause Recommended Action(s)
Page 50: Solving Battery Problems
........Solving Battery Problems The following table lists some common battery problems and recommended actions to take when they occur.
Page 54: Solving Hard Drive Problems
Reformat the hard drive. Contact your Compaq authorized dealer, reseller, or service provider or Compaq customer support for assistance. Hard drive error occurs. Hard drive may be damaged. Try inserting another removable drive, if the hard drive is in the MultiBay.
Page 55: Solving Hardware Installation Problems
........Solving Hardware Installation Problems Table 2-23 Solving Hardware Installation Problems Problem...
Page 56 ........Solving Infrared Connection Problems NOTE: The computer is shipped with the infrared port disabled.
Page 57: Solving Modem Problems
........Solving Modem Problems Table 2-25 Solving Modem Problems Problem...
Page 58 ........Table 2-25 Continued Problem Probable Cause Recommended Action(s)
Page 60: Solving Pc Card Problems
........Solving PC Card Problems Table 2-26 Solving PC Card Problems Problem...
Page 61: Solving Power Problems
........Solving Power Problems Table 2-27 Solving Power Problems Problem...
Page 62: Solving Screen Problems
........Solving Screen Problems IMPORTANT: Conduct all tests on a working monitor.
Page 63 Small spots, called on-pixels, No action is required. spots appear on the computer often appear on CTFT CTFT display. screens. Compaq limits the number of these on-pixels to 0.003 percent. Display on an external Incorrect display device Double-click the Display icon in Control monitor is distorted.
Page 64: Solving Usb Problems
........Solving USB Problems Table 2-29 Solving USB Problems Problem...
Page 65: Illustrated Parts Catalog
........Chapter 3 Illustrated Parts Catalog IMPORTANT: Various spare parts for the Armada 7700 Family of Personal Computers may appear to be identical to corresponding spare parts on the Armada 7800 computer.
Page 66: Computer System Major Components
........3.1 Computer System Major Components Figure 3-1.
Page 68: Miscellaneous Plastics Kit Components
........3.2 Miscellaneous Plastics Kit Components Figure 3-2.
Page 69: Miscellaneous Hardware Kit Components
........3.3 Miscellaneous Hardware Kit Components Figure 3-3.
Page 70: Power Equipment
........3.4 Power Equipment Figure 3-4.
Page 71: Mass Storage Devices
........3.5 Mass Storage Devices Figure 3-5.
Page 72: Items That Ship With The Computer
........3.6 Items that Ship with the Computer Figure 3-6.
Page 74: Options
........3.7 Options Figure 3-7. Options 3-10 Illustrated Parts Catalog...
Page 76: Miscellaneous
........3.8 Miscellaneous Table 3-8 Spare Parts: Miscellaneous (not illustrated) Description Spare Part Number...
Page 77: Removal And Replacement Preliminaries
........Chapter 4 Removal and Replacement Preliminaries This chapter provides essential information for proper and safe removal and replacement service.
Page 78: Cables And Connectors
........Cables and Connectors Cables must be handled with extreme care to avoid damage.
Page 79: Preventing Electrostatic Damage
........4.4 Preventing Electrostatic Damage Many electronic components are sensitive to electrostatic discharge (ESD).
Page 80: Workstation Precautions
........Workstation Precautions Use the following grounding precautions at workstations: Cover the workstation with approved static-dissipative material (refer to Table 4-2 later in this chapter).
Page 81: Grounding Equipment And Methods
........Grounding Equipment and Methods Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
Page 82: Electrostatic Voltage Levels And Protective Materials
........Electrostatic Voltage Levels and Protective Materials Table 4-1 shows how humidity affects the electrostatic voltage levels generated by different activities.
Page 83: Removal And Replacement Procedures
Removal and Replacement Procedures 5.1 Serial Number The computer serial number should be reported to Compaq when requesting information or ordering spare parts. The serial number is located on the bottom of the computer (Figure 5-1). Figure 5-1. Serial Number Location...
Page 84: Disassembly Reference Chart
........5.2 Disassembly Reference Chart Use the chart below to determine the section number to be referenced when removing components from the computer.
Page 85: Disassembly Sequence Chart
........5.3 Disassembly Sequence Chart Use the chart below to determine the disassembly sequence for removing components from the computer.
Page 86: Preparing The Computer For Disassembly
........5.4 Preparing the Computer for Disassembly 1.
Page 87 ........4. Press the eject button .
Page 88 ........Undocking the Computer from the Armada MiniStation 1.
Page 89: Disconnecting The Computer
........Disconnecting the Computer If the computer is docked in an ArmadaStation or Armada MiniStation, refer to the "Undocking the Computer"...
Page 90: Computer Logo
........5.5 Computer Logo The computer logo has an adhesive backing for installation.
Page 91: Computer Feet
........5.6 Computer Feet The computer feet are oblong, adhesive-backed rubber pads.
Page 92: Battery Packs
........5.7 Battery Packs WARNING: To reduce the risk of injury or damage to the battery pack, do not crush, puncture, or incinerate the battery pack or short the metal contacts.
Page 93 ........2. Tilt the computer at an angle so the bottom of the computer is accessible (Figure 5-9).
Page 94: Removing A Battery Pack From The Multibay
........5. Pull the battery pack out of the battery bay (Figure 5-10). Figure 5-10.
Page 95 ........2. Tilt the computer at an angle so the bottom of the computer is accessible (Figure 5-11).
Page 96 ........6. Pull the battery pack out of the MultiBay (Figure 5-12). Figure 5-12.
Page 97: Inserting A Battery Pack Into The Battery Bay
........Inserting a Battery Pack into the Battery Bay WARNING: To prevent damage to the computer, do not insert a battery pack into the battery bay until the computer is fully reassembled.
Page 98: Inserting A Battery Pack Into The Multibay
........Inserting a Battery Pack into the MultiBay WARNING: To prevent damage to the computer, do not insert a battery pack into the MultiBay until the computer is fully reassembled.
Page 99: Hard Drives
........5.8 Hard Drives Removing a Hard Drive from the Hard Drive Bay Before removing a hard drive, back up all information on the hard drive.
Page 100 ........6. Pull the hard drive out of the hard drive bay (Figure 5-16). Figure 5-16.
Page 101 ........7. Pull the metal hard drive up and out of the plastic hard drive tray (Figure 5-17). Figure 5-17.
Page 102: Inserting A Hard Drive Into The Hard Drive Bay
........Inserting a Hard Drive into the Hard Drive Bay 1.
Page 103 ........6. Slide the hard drive assembly into the hard drive bay (Figure 5-19). Figure 5-19.
Page 104: Inserting A Hard Drive Into The Multibay
........Inserting a Hard Drive into the MultiBay If you are moving a hard drive from the hard drive bay to the MultiBay, remove the hard drive from the hard drive tray.
Page 105: Removing A Hard Drive From The Multibay
........NOTE: You can secure the hard drive assembly in the MultiBay using a single- or dual-bay security screw included with the computer.
Page 106: Multibay Devices
........6. Pull the hard drive assembly out of the MultiBay (Figure 5-22). Figure 5-22.
Page 107 ........3. Tilt the computer at an angle so the bottom of the computer is accessible (Figure 5-23).
Page 108 ........7. Pull the drive out of the MultiBay (Figure 5-24). Figure 5-24.
Page 109: Inserting Multibay Devices
........Inserting MultiBay Devices 1.
Page 110: Memoryexpansion
........5.10 Memory Expansion Removing the Memory Expansion Slot Cover The memory expansion compartment is located on the bottom of the computer.
Page 111 ........4. Remove the screw that secures the memory expansion slot cover to the computer (Figure 5-26).
Page 112: Removing A Memory Expansion Board
........Removing a Memory Expansion Board 1.
Page 113: Inserting A Memory Expansion Board
........Inserting a Memory Expansion Board The memory expansion boards are asymmetrically keyed (notched) to ensure correct positioning.
Page 114: Replacing The Memory Expansion Slot Cover
........Replacing the Memory Expansion Slot Cover 1.
Page 115: Keyboard Assembly
........5.11 Keyboard Assembly The keyboard assembly consists of the keyboard, keyboard bezel, and the pointing device, and is spared as a unit.
Page 116 ........5. Turn the computer right side up with the front of the computer facing forward. 6.
Page 117 ........8. Lift the keyboard assembly straight up and away from the computer (Figure 5-32). Figure 5-32.
Page 118: Power Supply
........5.12 Power Supply The power supply is located in the rear left side of the computer.
Page 119 ........7. Position the computer so the rear panel faces forward. 8.
Page 120: Fan Assembly
........5.13 Fan Assembly The fan assembly consists of the motorized fan and a rubber mounting sleeve.
Page 121: Audio/Usb Board
........5.14 Audio/USB Board The audio/USB board is located in the right rear area of the computer and connects to the modem or audio only board.
Page 122: Modem Board
........6. Position the computer so the front faces forward. 7.
Page 123 ........3. Remove the keyboard assembly (Section 5.11). 4.
Page 124: Audio Assembly Bracket
........5.16 Audio Assembly Bracket The audio assembly bracket is located in the right rear area of the computer and covers the PC Card assembly.
Page 127: Lithium Disc Cell Battery
........5.17 Lithium Disc Cell Battery The lithium disc cell battery is located underneath the audio assembly bracket.
Page 128: Processor Module Assembly
........5.18 Processor Module Assembly The processor module assembly is located in the center of the computer.
Page 129 ........7. Remove the two screws that secure the processor module assembly to the system board (Figure 5-43).
Page 130 ........Reverse the removal procedure to install the processor module assembly. Before installing the two screws on the processor module assembly, make sure the connectors are properly seated.
Page 131: Display Assembly
........5.19 Display Assembly Removing the Display Assembly 1.
Page 132 ........9. Remove the screw that secures the display video cable connector to the system board (Figure 5-45).
Page 133 ........10. Grasp the tabs on the display video connector and disconnect the display video cable from the system board (Figure 5-46).
Page 134 ........11. Disconnect the auxiliary battery cable from the system board (Figure 5-47). Figure 5-47.
Page 135 ........12. Position the computer so the rear panel faces forward. 13.
Page 136 ........14. Position the computer so the front faces forward. 15.
Page 137 ........16. Disconnect the auxiliary battery assembly from the display ground cable (Figure 5-50).
Page 138: Installing The Display Assembly
........Installing the Display Assembly 1.
Page 139 ........2. Position the display clutches so the display assembly is fully upright when it is installed in the computer (Figure 5-52).
Page 140 ........3. Hold the display assembly approximately one to two inches above the base assembly, parallel to the computer (Figure 5-53).
Page 141 ........9. Connect the display video cable to the system board and install the screw that secures the cable to the system board (Figure 5-54).
Page 142 ........11. Route the auxiliary battery cable between the modem connector and the audio assembly bracket (Figure 5-55).
Page 143: Pc Card Eject Levers
........5.20 PC Card Eject Levers The PC Card eject levers are located on the right side of the computer.
Page 144: Installing The Pc Card Eject Levers
........Installing the PC Card Eject Levers NOTE: The top and bottom eject levers are not interchangeable.
Page 145: System Board
........5.21 System Board Follow these steps to remove the system board: 1.
Page 146 ........13. Remove the expansion connector shield by lifting it from the computer base assembly (Figure 5-58).
Page 147 ........14. The keyboard connector insulator is attached to the back of the keyboard connector (Figure 5-59).
Page 148 ........16. Remove the four screws that secure the system board to the computer base assembly (Figure 5-60).
Page 149 ........18. Position the computer so the rear panel faces forward. 19.
Page 150 ........22. Position the computer so the front faces forward. 23.
Page 151: Pc Card Assembly
........5.22 PC Card Assembly 1.
Page 152 ........13. Turn the system board upside down. 14.
Page 153: I/O Bracket
........5.23 I/O Bracket The I/O bracket provides support for the connectors on the rear panel of the computer and serves as a shield.
Page 154 ........14. Lift the back edge of the I/O bracket. When the bracket clears the computer base assembly, lift it out of the base assembly (Figure 5-64).
Page 155: Specifications
........Chapter 6 Specifications This chapter provides physical and performance specifications for the: 6.1 Physical and Environmental Specifications...
Page 156: Display Specifications
........6.2 Display Specifications Table 6-2 13.3-inch XGA, CTFT Display U.S.
Page 157: Hard Drive Specifications
........6.3 Hard Drive Specifications Table 6-3 Hard Drive 5.0-GB...
Page 158: Diskette Drive Specifications
........6.4 Diskette Drive Specifications Table 6-4 Diskette Drive Diskette Size...
Page 159: Cd-Rom Drive Specifications
........6.5 CD-ROM Drive Specifications Table 6-5 20X Max CD-ROM Drive Applicable Disc...
Page 160: Battery Pack Specifications
........6.6 Battery Pack Specifications Table 6-6 Lithium Ion Battery Pack U.S.
Page 161: System Interrupts
........6.7 System Interrupts Table 6-7 System Interrupts Hardware IRQ...
Page 162: System Dma
........6.8 System DMA Table 6-8 System DMA Hardware DMA...
Page 163: System I/O Addresses
........6.9 System I/O Addresses Table 6-9 System I/O Addresses I/O Address (Hex)
Page 165: System Memory Map
........6.10 System Memory Map Table 6-10 System Memory Map Size...
Page 166: Connector Pin Assignments
........Appendix A Connector Pin Assignments Table A-1 Ethernet RJ-11 Connector...
Page 167: Parallel Connector
........Table A-4 Stereo Speaker/Headphone Jack Connector Signal Audio out...
Page 172: Power Cord Set Requirements
Power cord sets for use in other countries must meet the requirements of the country where the computer is used. For more information on power cord set requirements, contact a Compaq authorized reseller or service provider. General Requirements The requirements listed below are applicable to all countries: 1.
Page 174: Screw Matrix
........Appendix C Screw Matrix This appendix contains information for all screws, screwlocks, and bushing guides used when servicing the Armada 7800 Computer.
Page 176: Appendix C Screw Matrix
........Table C-4 Part Number Description Head Torque...
Page 184: Index
MultiBay, illustrated, 3-10 illustrated, 3-2 5-16 option part number, 3-11 insulator, 5-40 option part number, 3-11 spare part number, 3-11 removing, 5-39 removing from battery bay, checkup spare part number, 3-3 5-10 computer, 2-10 Compaq Index...
Page 185 1-7 embedded numeric keypad design overview, 1-19 bottom, 1-18 illustrated, 1-16 diagnostics display, 1-12 error codes Compaq, 2-18 front, 1-12 audio test, 2-16 disassembly reference chart, illustrated, 3-2 CD-ROM test, 2-16 keyboard, 1-16, 1-17 Computer Checkup (TEST), disassembly sequence chart,...

Compaq Armada 7800 6266 T 5000 D M 1 Maintenance And Service Manual

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

Chapter 6

Appendix A

Appendix B

Appendix C SCREW MATRIX

Quick Links

Troubleshooting

Related Manuals for Compaq Armada 7800 6266 T 5000 D M 1

Summary of Contents for Compaq Armada 7800 6266 T 5000 D M 1

Table of Contents