Table of Contents
Advertisement
Assembly steps on the appliance
fronts
^ Screw the inside feet c all the way
in. They are not allowed to come in
contact with the floor.
^ Align the combination of appliances
with the outer feet b.
Adjust the feet (see also "Installation -
Aligning the appliance").
– Front:
Align the feet using the spanner r
supplied.
– Rear:
Align the back feet via the adjusting
axis using a screwdriver.
Turn the adjusting axis to the right to
raise the back of the appliance.
Installing in a side-by-side combination
^ Press the long stainless steel trim l
into the gap at the front between the
appliances. Ensure that the bottom of
the trim sits against the connecting
bracket g.
Pressing both ridges along the trim
together makes it easier to fit the
trim into the gap.
^ Carefully work the stainless steel trim
l into the gap. Use a soft cloth to do
this to avoid denting the trim.
^ Carefully remove the protective foil
from the stainless steel strip.
71
Advertisement
Table of Contents
