Pressure Test; Figure 060-8: Pressure-Measuring Instrument Set; Table 060-14: Brew Unit Position Sensor (B10) Display Codes; Table 060-15: Flow Meter Pulse Rates - Miele CVA 2650 Technical Information
Hide thumbs
Also See for CVA 2650:
- Operating instructions manual (105 pages) ,
- Specification (2 pages) ,
- Operating instructions manual (68 pages)
Table of Contents
Advertisement
Technical Information
Display Position
Value (Approx.)
046
012
167
150
010
172
Table 060-14: Brew Unit Position Sensor (B10) Display Codes
Number of Pulses
About 15
<2 (for more than 7 seconds)
0 (for more than 7 seconds)
Table 060-15: Flow Meter Pulse Rates
4.6
Pressure Test
Required tools:
Figure 060-8: Pressure-Measuring Instrument Set
Note:
A small measuring container will also be required for this test.
1. Let the appliance warm up to normal operating temperature.
2. Remove the capsule magazine from the appliance.
3. Remove the capsule plate (Figure 060-9, Item A).
4. Remove the rubber insert (Figure 060-9, Item B).
Position Explanation
Rest
Eject
Press (with capsule plate only)
Service
Raised end position
Lower end position (with capsule plate only)
Explanation
Water intake in order (w/o capsule)
Insufficient water intake (F17: Section 060-3.8)
No water intake (F10: Section 060-3.7)
1 Connection piece
2 Holding bracket
3 Pressure-measuring instrument
90
CVA 265x & CVA 266x
- Quick Links:
- Service Mode Summary
Hide quick links:
Advertisement
Table of Contents
