Jabra Pro 9460 Duo Quick Start Quide

Connection with aastra 6753i, 6755i, 6757i

Hide thumbs Also See for Pro 9460 Duo:

Download this manual

27/06/2021 21:14

Jabra Pro 9460 Duo

How do I connect my Jabra Pro 9400 / Go 6400 with Aastra

6753i, 6755i, 6757i?

Requirements:

Jabra Link 14201-10

DHSG connection cable from Aastra

Aastra 53i / 55i / 57i / 57iCT / 6753i / 6755i / 6757i / 6757iCT phone with

firmware 2.5.1.2000 or later.

To connect your headset to your phone, follow these steps:

1. Plug the RJ9 connector (green) from the split end of the Aastra DHSG

cord into the headset socket.

2. Plug the RJ45 connector (yellow) from the split end of the Aastra DHSG

cord into the socket for the expansion module.

3. Plug the single end of the Aastra DHSG cord (blue) in the RJ45 adapter.

4. Plug the single end of the Jabra Link 14201-10 cable (blue) into the free

socket on the RJ45 adapter.

https://www.emea.jabra.com/supportpages/jabra-pro-9460/9460-29-707-

Page 1 of 4

101/faq/4b3cba38-ca36-4410-8a36-3e1fbff5b658

Page 1 3. Plug the single end of the Aastra DHSG cord (blue) in the RJ45 adapter. 4. Plug the single end of the Jabra Link 14201-10 cable (blue) into the free socket on the RJ45 adapter.
Page 2 27/06/2021 21:14 5. Connect the split end of the DHSG cable to the Jabra device base as follows: a. Plug the RJ9 connector into the socket with the complete “phone” symbol. b. Plug the RJ45 connector into the socket marked “AUX”.
Page 3 27/06/2021 21:14 c. Select Manual. d. Select adapter type DHSG. 7. Set the phone setup switch to position A. 8. We recommend setting the microphone volume to 7 out of 13. https://www.emea.jabra.com/supportpages/jabra-pro-9460/9460-29-707- Page 3 of 4 101/faq/4b3cba38-ca36-4410-8a36-3e1fbff5b658...
Page 4 27/06/2021 21:14 As part of the installation, you can dial into your local Jabra setup server, which will configure the audio path. Follow the instructions shown on the display. If your Jabra setup server is unavailable, contact your local Jabra Support team.