How do i connect my jabra wireless headset with the jabra link 14201-41 to my cisco 8941 or 8945 desk phone so i have remote call control using my headset (2 pages)
Page 1
DHSG cord into the socket for the expansion module. 3. Plug the single end of the Aastra DHSG cord (blue) in the RJ45 adapter. 4. Plug the single end of the Jabra Link 14201-10 cable (blue) into the free socket on the RJ45 adapter. https://www.emea.jabra.com/supportpages/jabra-pro-9460/9460-29-707-...
Page 2
11/02/2024 07:03 5. Connect the split end of the DHSG cable to the Jabra device base as follows: a. Plug the RJ10 connector into the socket with the complete “phone” symbol. b. Plug the RJ45 connector into the socket marked “AUX”.
Page 3
11/02/2024 07:03 c. Select Manual. d. Select adapter type DHSG. 7. Set the phone setup switch to position A. https://www.emea.jabra.com/supportpages/jabra-pro-9460/9460-29-707- Page 3 of 4 101/faq/4b3cba38-ca36-4410-8a36-3e1fbff5b658...
Page 4
11/02/2024 07:03 8. We recommend setting the microphone volume to 7 out of 13. As part of the installation, you can dial into your local Jabra Setup server which will configure the audio path. Follow the instructions shown on the display. If your Jabra setup server is unavailable, contact your local Jabra Support team.