Table of Contents
Advertisement
Washing machine supervisor level
Delay start
Memory
Manual control
Change order
Temperature unit
Weight unit
Supervisor code
WiFi
108
The delay start (timer) display can be switched on or off.
Factory default: on
The washing machine will save the settings (temperature, spin speed
and some of the options) which have been selected for a wash pro-
gramme after the programme has started.
When the wash programme is chosen again, the saved settings will
appear on the washing machine's display.
Factory default: off
The manual control function can be switched on or off. Switch-on can
be carried out with or without identification.
The skip function can be switched on or off.
You can select the unit for the temperature display (°C/°F).
You can decide whether load sizes are displayed in "kg" or "lbs".
You can also switch this information off altogether.
You can alter the access code to the supervisor level.
Enter the current code.
Enter a new code.
Control the networking of your washing machine.
- Setup
This message only appears if the washing machine has not yet
been connected to a WiFi network.
- Deactivate (visible when the network is activated)
The network remains set up; the WiFi function is switched off.
- Activate (visible if the network is deactivated)
The WiFi function is reactivated.
- Connection status (visible when the network is activated)
– The quality of WiFi reception
– The network name
– The IP address
- Set up again (visible if already set up)
Resets the WiFi login (network) to immediately re-establish a new
connection.
- Reset (visible if already set up)
The network is no longer set up. A new connection has to be estab-
lished in order to use the network again.
– The WiFi is switched off
Advertisement
Table of Contents
