Service Access - Miele KM400 Series Technical Information
Combi-sets
Hide thumbs
Also See for KM400 Series:
- Operating instructions manual (24 pages) ,
- Installation instructions manual (20 pages) ,
- Product and cut-out dimensions (1 page)
Table of Contents
Advertisement
Technical Information
5.2
Service Access
Figure 5-4: To open Combi-Sets for service; remove the screws from the
sides of the appliance. (KM404 with the visible sides shown for illustration
purposes only). Does NOT apply to the KM406.
1. Remove the Combi-Set from the counter (5.1)
2. Remove the Knob(s) and Sealing Ring(s)
3. Refer tp Figure 5-4; remove the two (2) screws from each side
of the appliance (Except KM406 – See Note Below)
KM406 Note
The top and bottoms of the appliance are secured using the four (4)
Torx Screws on the underside of the base. Refer to figure 5-5.
4. Carefully lift the top framed section from the base.
5. Note and disconnect any connections as necessary.
a. For KM404 and KM406 remove all burner caps and rings.
b. For KM404 and KM406 remove the Retaining Screws
from the Burner Base(s) (Figure 5-6, Item 1)
34
KM400 Series Combi-Sets
- Quick Links:
- Km400 Overview
- Km406 Overview
- Installation
Hide quick links:
Advertisement
Table of Contents
