Table of Contents
Advertisement
Cleaning and care
Place the holder in the middle of the
protective strip at the back of the
adjustable shelf so that it clicks into
position.
Touch the symbol on the display to
confirm that the filters have been
replaced.
The "Replace charcoal filter" reminder
will go out on the display and the
counter will be reset.
The symbol will go out on the start
display.
Cleaning the door seal
Risk of damage as a result of
incorrect cleaning.
If you treat the door seal with oils or
grease, it can become porous.
Do not use any oils or grease on the
door seal.
The door seal should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
Cleaning the ventilation gaps
A build-up of dust will increase the
energy consumption of the appliance.
66
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele vacuum cleaner dusting
brush, for example).
After cleaning
Switch the Cleaning mode function
off again by tapping on on the
start display.
Tap again.
When Cleaning mode is switched off,
the symbol will light up white.
The refrigeration appliance will start
cooling again.
Replace all shelves and accessories in
the refrigeration appliance.
Switch on the SuperCool function
for a while so that the temperature
inside the refrigeration appliance will
drop quickly.
Place food in the refrigeration
appliance as soon as it reaches the
required coldness.
Close the appliance door(s).
Advertisement
Table of Contents
