Table of Contents
Advertisement
2.
Remove the Phillips M2.0 × 2.5 screw (2), and then remove the WWAN module (3).
3.
If the WWAN antenna is not connected to the terminal on the WWAN module, a protective sleeve
must be installed on the antenna connector, as shown in the following illustration.
Reverse this procedure to install the WWAN module.
Solid-state drive
To remove the solid-state drive (SSD), use this procedure and illustration.
Table 5-4
Solid-state drive descriptions and part numbers
Description
2 TB, PCIe-4 × 4, TLC
2 TB, PCIe-4 × 4 (The People's Republic of China [ (PRC)]
1 TB, PCIe-4 × 4, TLC
1 TB, PCIe-4 × 4
1 TB, PCIe-4 × 4, TLC (PRC)
Spare part number
M52027-001
N77396-001
M16560-001
N45474-001
N77395-001
Solid-state drive
41
Advertisement
Table of Contents
